Font Size: a A A
Keyword [Sinking]
Result: 1 - 20 | Page: 1 of 6
1. Study On Positive-negative Forming Theory Of Revolving Shell And Bulging Technology Of Aotomobile Axle Housings
2. A Study And Application Of Fracturing On Low Permeability Bottom-Water Driven Reservoir
3. Mechanical Properties And Its Application Of Thick Frozen Shaft Wall With Water-abundant Soft Rock
4. Study On The Loads And Design Theory Of The Monolayer Freezing Shaft Lining In Water-rich Bedrock
5. The Law Of The Earth's Surface Movement Of Crowd Exploitation On Closely Horizontal Coal Seam
6. Analysis Of Intensity And Stiffness And Fatigue Life For The Hydrobulging Automobile Axle Housing
7. Numerical Simulation Of Hydroforming Process For Automobile Rear Axle Housing
8. Optimizing Study Of The Size Of The Jamb In The Nature System Of Supporting
9. Research On The Oil-Flotation In Higee Field
10. The Research And Application On Micro WEDM Technology Basing On The AGIE CHALLENGE ECUT 2F Machine Tool
11. Freeze Sinking Sidewall's Stress Analysis Considering Damage Under Complicated Load
12. Reconstruction Technology Of Ecological Engineering Land Reclamation In The Coal Mining Subsidence Of Typical Plain Area
13. Risk Analyse And Informationization Management Of The Freezing Sinking Engineering In GuoTun Coal Mine
14. Study On The Shaft Construction Technology Of Passing Through Water-rich And Extra Thick-loose Tertiary Gravel
15. Research On Antisepticize And Antiscaling For Inflowing And Gathering Well-sinking
16. Stability Analysis Based On Surface Subsidence Of Shendan PDL Benxi Section
17. The Research Of Freezing Method Sinking Technology In Thick Strong Expansion Alluvium With Large Flow
18. Research On High-temperature Desulfurization And Carbon-thermal Reduction Of Lead-zinc Metallurgical Slags For Metals Recovery By Bath Smelting
19. Research And Application Of Simultaneous Shaft Sinking By Multiple Deep Holes Blasting With Sphirecal Charge
20. The Research On Deep Soft Rock And Freezing Shaft Sinking Technology And Information Construction
  <<First  <Prev  Next>  Last>>  Jump to