Solid-Liquid Mixing - Globe Thesis

Keyword [Solid-Liquid Mixing] Result: 1 - 18 \| Page: 1 of 1
1.	Numerical Simulation And Optimization On Flow Of Coal Kneading Device
2.	Research On Semisolid Forming Of Hypereutectic Al-Si Alloys
3.	Research On Solidification Microstructural And Thermal Deformation Simulation Of Alloy2618-ti And Relevant Phase Equilibrium Of This System
4.	Solid Suspension Characteristics Of Coaxial Mixers In Solid-liquid Stirred Tanks
5.	The Experimental Study On Mixing Performance Of Following Dynamic Mixeing Equipment
6.	Research Of Experiment About Flow And Mixing Characteristic In An Eccentric Stirred Tank
7.	Preparation Process And Experimental Study Of Bonded Magnetic Abrasives Based On Solid-Liquid Mixing And Direct Molding
8.	Simulation And Effect Evaluation Of Solid-liquid Mixing Process Of Copper Anode Mud In Vertical Kettle
9.	Research On Coaxial Mixing Of Floating Particles In Viscous System
10.	The Structural Design Of CO₂ Pressurized Closed-system Sand Blender Used On Solid-liquid Mixing
11.	Experimental Study On Jet Failure Of A Wall Attached Jet Generator In Solid-liquid Mixing State
12.	Study On Solid-liquid Mixing Fluid Field In Cutting Area Of High Speed Internal Cooling Wet Milling Hole Machining
13.	Numerical Simulation And Optimization Of Extracting Vanadium In The Stirred Tank By Hydrometallurgy Method
14.	Development Of A DEM-VOF Model For The Turbulent Free-surface Flows With Particle
15.	Numerical Simulation Of Solid-liquid Mixing And Flow Characteristics In Stirred Reactor Based On Solid Base-catalyzed Transesterification
16.	Study On Solid-Liquid Mixing And Leaching Intensification In Wet-Process Phosphoric Acid Stirred Reactor
17.	Study On The Physical Stability Of Solid-liquid Mixed Fuel Air Explosive
18.	Study On Structure Optimization And Solid-liquid Dispersion Mixing Performance Of Paddle Stirred Tank
<<First <Prev Next> Last>> Jump to