Font Size: a A A
Keyword [Spraying coating]
Result: 1 - 20 | Page: 1 of 3
1. Study On Prepare Composite Coatings By Controlled Atmsphere Thermal Spraying
2. Self-Lubricate Aluminum Bronze Coating And Its Tribological Properties
3. Nano-doped Al <sub> 2 </ Sub> The O <sub> 3 </ Sub> To +13 Wt.% Of Tio <sub> 2 </ Sub> Plasma Sprayed Ceramic Coating And Applied Research
4. Research And Development On System Of New Coatings For Protection Of Boiler Tubes In Coal-Fired Power Station
5. Abrasive And Corrosive Behaviors Of Zn-Al Cold Spraying Coating On The Surface Of Mg Alloy
6. Study On Corrosion Resistant Coatings For Zinc Or Aluminum Alloys At Molten State
7. Study On Mechanism Of High Speed Spinning Bell Electrostatic Spray
8. Study On The Performance Of Wear And Impact Of Al2O3 Ceramic Thermal Spraying Coating
9. Study On Ceramic Coating For Cylind Erliner
10. Study Of Ni-Cr Coating Characteristics For Resistant High-temperature Corrosion Of Power Station Boiler
11. Studies On The Production Technology And Storage Stability Of Fortified Rice
12. Research Preparing And Function Of High-performance Ceramic Coating For Thermo-spraying
13. The Study Of Sealing Layer For Plasma Spraying Coating By Sol-Gel Method
14. Study On Nial 2 O 4 Spinel Coating Of Inert Anode With Flexible Transition Layer
15. The Preparation And Study Of Sealing Of SiO2-Al2O3/Epoxy Resin For Plasma Spraying Coating
16. Study On Preparation And Properties Of The Modified Basalt Powder And Its Coating Through Thermal Spraying
17. Study On Designand Heat Transfer Mechanism Of Fe-based Electric Arc Spray Coating
18. Study On The Corrosion Resistance Of Electric Arc Spraying Zn-Al Based Alloy Coatings
19. Process Optimization Of Colored Ti-Zr Conversion Coating On Aluminum Alloy And Research Of Adhesion Force Of The Electrostatic Spraying Coating
20. Preparation And Study On Cold Spraying Coating Based On Shaft Parts Repair
  <<First  <Prev  Next>  Last>>  Jump to