Surface Topography - Globe Thesis

Keyword [Surface Topography] Result: 1 - 20 \| Page: 1 of 10
1.	Study On Characterization And Characteristics Of Surface Topography By Excimer Laser
2.	Theoretical And Experimental Studies On Contact Damage Of Elastic Force Joint Sleeve Of Oil Film Bearing In Rolling Mill
3.	Research On Ultra-Precision Measuring Straightness And Surface Microtopography Analysis
4.	Study On Force And Surface Topography Modeling And Process Optimization Of Meso-Scale End-Milling
5.	Effect Of Surface Characteristics Of Material On Initial Droplet Formation And Heat Transfer Of Dropwise Condensation
6.	Abrasive-Free Water-Dissolution Polishing And Processing Mechanism For KDP Crystal
7.	Research On White Light Interference Based Measurement Methods And System For Ultra-precision Surface Topography
8.	Dynamic Micro/Nano Cutting System Modeling For Prediction And Analysis Of Surface Topography
9.	Research On Error Analysis And Prediction In Workpiece-Fixture-Cutter System
10.	Research On Slicing Mechanism And Technology With Fixed Diamond Wire Saw For Semiconductor Ceramics
11.	Research On Miniature 5-Axis Machine Tool And Meso-Scale Milling Models
12.	Development Of New Coatings And Technologies Against Marine Biofouling
13.	Theoretical And Experimental Studies On The Ultra-Precision Face-milling Of Engineering Ceramics
14.	Numerical Simulation And Analysis For Machined Surface Topography In Milling Process And Form Error In Face Milling Process
15.	Research On Physical Simulation Of Ball-end Milling Process
16.	Research On Improving Precision Of Surface Topography By SPM
17.	Simulation Research On The Surface Ground With Order Distributed Grains
18.	The Study On Precision Control In Milling Process Based On Computer Simulation Technology
19.	Characterization And Lubrication Analysis Of Three-dimensional Surface Topography
20.	Research Of The Effect Of KDP Crystal Anisotropy On The Cutting Surface Roughness
<<First <Prev Next> Last>> Jump to