Font Size: a A A
Keyword [Thermal Spraying]
Result: 81 - 100 | Page: 5 of 6
81. The Structure And Properties Of Fe-based Amorphous Alloys And Composites Prepared By HVOF Thermal Spraying
82. Study On Reaction Modification Mechanism,microstructure And Properties Of Thermal Spraying Coatings
83. Diagnostic Of Thermal Spraying Plasma Jet Characteristic And Study On Formation Of The Coatings
84. Technical Study On The Preparation Of Bi2Se0.3Te2.7 Thermoelectric Materials By Thermal Spraying
85. Study On Thermal Spraying Cr3C2-NiCr Composite Coating For Power Plant Boiler Pipeline
86. Study On Diffusion Regularity And Control Methods Of Ultrafine Dust In Thermal Spraying Workshop
87. Study On The Microstructure And Properties Of AZ31B Magnesium Alloy After Surface Modification
88. Matrix Metal Component Design And Preparation For Carbide Ceramic Composite Coatings
89. Study On The Machanism Of Fatigue Wear Failure Of NiCr-Cr3C2 Coating Deposited By Thermal Spraying
90. Research On Erosion Wear Mechanisms Of NiCr-Cr3C2/NiCrAl Coating For Impeller Remanufacturing
91. Preparation And Application Of Magnetic Metal Coating On Ceramic Substrates
92. Study On The Effect Of Interface Structure On Interface Bonding Strength Of Remanufacturing Coating
93. Simulation Analysis Of Residual Stress In Plasma Sprayed Thermal Spraying Layer
94. Large Load Impact Behavior Of WC-12Ni Cemented Carbide Coating Sprayed By Hvof
95. Preliminary Study On The Interaction Of Fouling-corrosion,Corrosion-cavitation Erosion Of Typical Thermal Sprayed Coatings In Marine Environment
96. Preparation And Properties Of Modified C/C Composite By The Combination Of Spraying And Melt Infiltration
97. Research Of Composition And Morphology And Corrosion Behavior Of Thermal Spraying Zinc Aluminum Coatings
98. Study On The Preparation And Performance Of Thermal Spraying Aluminum-based Anticorrosive Coating For Water Riser Sleeves
99. Integration of process diagnostics and three dimensional simulations in thermal spraying
100. Modeling of air-droplet interaction, substrate melting and coating buildup in thermal spraying
  <<First  <Prev  Next>  Last>>  Jump to