Font Size:
a
A
A
Keyword [Thin plates]
Result: 1 - 20 | Page: 1 of 2
1.
Controlling Welding Stress, Deformation And Hot Cracking Of Aluminum Alloy Thin Plates By Welding With Trailing Rotating Extrusion
2.
Study On Controlling Of Welding Deformation And Hot Cracks Of Aluminum Lloy Thin Plates By Two Direction Pre-Stress
3.
The Research Of Single Face Welding-Double Face Forming Automatic Welding Equipment
4.
Study On Formation Mechanisms Of Porosity And The Cracks In Laser Welding Of Magnesium Alloy Thin Plates
5.
Research On Topology Optimization Methods For Low Noise Design Of Thin Plates Base On Damping Energy Dissipation
6.
The Vibration Power Flow Performance Of Thin Plates
7.
Study On Welding Process Of AZ31B Magnesium Thin Plates
8.
Study On The Cold Rolled Strip Buckling And Vibration Based On Incompatible Deformation Theory
9.
Bending Analysis Of Functionally Graded Thin Plates With Different Moduli In Tension And Compression
10.
Thermal-mode Analysis Of FGM Thin Plates With Different Components
11.
Research On Variable-stiffness Composite Thin Plates With Holes Of Buckling And Failure Under Compression
12.
Study Of The Finite Element Simulation Analysis Of Structural Damage Identification Based On Lamb Waves Method
13.
Research On The Control Of Flexural Waves In The Thin Plates Metamaterial Based On The Coordinate Transformation Theory
14.
Numerical Simulation Of Welding Buckling Deformation In Thin Plates With Considering Initial Residual Stress Influences
15.
Flutter Stability Of Longitudinal Torsional Composite Ultrasonic Vibration Milling Of Thin Plates
16.
Study On The Overlying Strata Movement Law And Control Technology Of "Three Soft" Coal Seam Up-dip Working Face
17.
Study On Plane Grinding Process Of Low-rigidity Thin Plates
18.
The Method Of Finite Spheres For Ultrasonic Scattering Of Defects In Thin Plates
19.
Research On Welding Technology Of Ultra-thin T2 Copper/6061 Aluminum Alloy By Using Pulsed Laser
20.
Effective Medium Theory For Elastic Metamaterial Thin Plates
<<First
<Prev
Next>
Last>>
Jump to
