Ti-6Al-4V alloy - Globe Thesis

Keyword [Ti-6Al-4V alloy] Result: 21 - 40 \| Page: 2 of 6
21.	Research On Preparation And Interfacial Reaction Of Ti-6Al-4V Alloy Prosthetic Joint Precision Casting
22.	3D-FE Simulation Of Equal Channel Angular Pressing Of Ti-6Al-4V Alloy
23.	Investigation Of Microstructure And Mechanical Properties Of Ti-6Al-4V Alloy Fabricated By Electron Beam Melting
24.	The Influence Of Nitrogen Content On Layer Crack Of Ti-6Al-4V Alloy By Laser Nitriding
25.	Metallothermic Reduction And Refining Process For Ti-6Al-4V Alloy
26.	Research On Properties Of B Modified Ti-6Al-4V Alloy Synthesized By SPS
27.	The Application Of Infrared Thermographic Method On Titanium Alloy For Studying Fatigue Behavior
28.	Research Of Electropulsing Treatment On Microstructures And Mechanical Properties Of Hot-rolled TC4Alloy
29.	Finite Element Simulation Of Cutting Force In High Speed Cutting Of Ti-6al-4v Alloy
30.	Ti-6al-4v Alloy Surface Laser Cladding Wc-12co/nicraly Composite Coating Microstructure And Properties Of,
31.	Investigation On Mechanical Properties And Localized Deformation Behavior Of Ultrafine Grained Ti-6Al-4V Alloy Prepared By Powder Metallurgy
32.	Study On High-speed Rolling And Heat Treatment Process Of Small Size Ti-6Al-4V Alloy Bar
33.	Numerical Simulation Method Of The Martensitic Transformation In Ti-6Al-4V Alloy And Its Application In High Speed Machining
34.	Interaction Of Adiabatic Shear Bands And Its Effect On Anti-multiple-hit Property In Ti-6Al-4V Alloy
35.	Effect Of Microstructures On Dynamic Compression Behavior And Ballistic Impact Property Of Ti-6Al-4V Alloy
36.	Tool Failure Mechanism In Milling Of Ti-6Al-4V Alloy Based On Coupled Thermo-mechanical-microstructural Modeling
37.	Effect Of The Content Of Alloying Elements On Dynamic Mechanical Properties Of Ti-6Al-4V Alloy
38.	Numerical Simulation On Isothermal Forging Process Of Ti-6Al-4V Frame For A Type Airplane
39.	Fabrication Of Low Cost Ti-6Al-4V Alloy By Metal Injection Molding And Its Thermohydrogen Processing
40.	Impact Of Heat Treatment For Milling Performance Of Milling Ti-6Al-4V Alloy
<<First <Prev Next> Last>> Jump to