Titanium alloy cutting - Globe Thesis

Keyword [Titanium alloy cutting] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Cutting Temperature In High Speed Milling Of Titanium Alloys
2.	Modeling Of Cutting Forces And Surface Roughness, And Parameter Optimization During High-Speed Machining Titanium Alloy
3.	Titanium Cutting Force Prediction Model And Optimization Of Processing Parameters
4.	Medical Titanium Alloy Cutting Process Fem Simulation And Experimental Study
5.	Research On Difficult-to-cut Materials Processing Technology Based On Titanium
6.	Investigation Of Craln And TI (CR, AL) SIC (O) N Coatings On Titanium Alloy Cutting Tools
7.	Optimization Model And Application In The Development Of Environment-Friendly Titanium Alloy Cutting Fluid Based On The Fahp
8.	Experimental Study On Titanium Alloy Cutting Process Using Surface Micro-textured Cutting Tool
9.	Based On Deform 3 D Analysis Of The Residual Stress Of Tc4 Titanium Alloy Cutting
10.	Grinding Force And Surface Integrity Of Titanium Alloy In Rotary Ultrasonic Vibration Grinding
11.	Research On Titanium Alloy TC4 Cutting Technology
12.	Research On The Cutting Force Prediction Model Of Titanium Alloy With BP Neural Network
13.	Based On The Abaqus Titanium Alloy High Speed Cutting Simulation Platform Of Development
14.	Experimental Study Of The Cutting Performance Of Titanium Alloy With Polished & Coated Carbide Inserts
15.	Innovative Design Of Cutting Edge Of Ti6Al4V Cemented Carbide Coated Tool
16.	Study On Processing Properties Of Ti-6Al-4V Titanium Alloy
17.	Modeling, Perception And Reconstruction On Tool Temperature Distribution In Titanium Alloy Cutting
18.	Chip Formation Mechanism In Multi-step Machining Of Ti6Al4V Titanium Alloy
19.	Research On The Modified Model Of Fracture Damage And The Control Of Chip Formation During Titanium Alloy Cutting
20.	Experimental Study On Surface Quality And Tool Wear Of Hot/Cold Assisted Titanium Alloy Cutting
<<First <Prev Next> Last>> Jump to