Tool geometry - Globe Thesis

Keyword [Tool geometry] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Grinding Technology And Cutting Performance Of PCD Tools
2.	Experimental Research On Carbide Drill With Multi-facet For ZGMn13 High Manganese Steel
3.	Simulation Study Of The Mechanical Properties And Geometry Of The Micro-cutter
4.	Research On Cutting Tool Geometry Parameters Optimization For Low Carbon Turning
5.	Study On Microcutting Mechanism Based On Minimum Uncut Chip Thickness
6.	Calibration For Non-Contact Cutting-tool Geometry Parameter Measuring Instrument
7.	The Preparation And The Analysis Of Wear Mechanism Of Single Crystal Diamond Tool In Cutting Magnesium-Aluminum Alloy
8.	Study On Ultra Precision Machining Mechanism Of Monocrystalline Silicon Based On Molecular Dynamics
9.	Material Flow Behavior And Mechanical Properties Of Refill Friction Stir Spot Welded Aluminum Alloy
10.	Influence Of Double Point Angle Drill Geometric Parameters On Thrust Force And Delamination In Drilling CFRP
11.	Properties Of FSW Lap Joint Of Aluminum And Optimization Of Tools
12.	The Research About The Effect Of Tool Geometry Angle And Nose Radius On Regenerative Chatter
13.	Finite Element Simulation Of High Speed Machining Ti6Al4V And Optimization Of Cutting Parameters
14.	Gas Turbine Drilling Tool Geometry Research And Processing Realization
15.	Study On The Improvement Of Ti6A4lV Titanium Alloy Gun Drilling Technology For Small Diameter Deep Hole Drilling
16.	Research On Tool Geometry Parameter Measurement Based On Surface Structure Light
17.	Experimental Studies On Damage Reduction For Trimming Process Of NOMEX Honeycomb Core
18.	Simplified Prediction Model Of Cylindrical Thread Milling Force And Optimization Of Tool Geometry Parameter And Cutting Parameter
19.	Deconvoluting the link between weld tool geometry and process parameters
20.	Effects of tool geometry and welding rates on the tool wear behavior and shape optimization in friction stir welding of aluminum alloy 6061 + 20% aluminum oxide MMC
<<First <Prev Next> Last>> Jump to