Ultrasonic rolling - Globe Thesis

Keyword [Ultrasonic rolling] Result: 21 - 40 \| Page: 2 of 3
21.	Research On Ultrasonic Rolling Device And Its Processing Experiment
22.	Surface Modification And Strengthening Of Tungsten Alloy For Die Casting Die
23.	Research On Surface Integrity Of Bearing Steel By Ultrasonic Roll Extrusion
24.	Study On Hardening Behavior And Mechanism Of Bearing Rings In Ultrasonic Rolling Extrusion
25.	Study On Grain Refinement Of Bearing Ring Surface By Ultrasonic Rolling Extrusion
26.	Research On The Mechanism Of Surface Strain Strengthening In Thermo-Mechanical Coupling High Speed Two-Dimensional Ultrasonic Rolling Process
27.	Hydrogen Embrittlement Of TC4 Alloy Treated By Ultrasonic Surface Rolling Based On The Small Punch Test
28.	Study On Residual Stress And Surface Properties Of TC4 Titanium Alloy By Ultrasonic Rolling
29.	Research On Composite Strengthening Process For Textured Surface Of Titanium Alloy TC4
30.	Research On The Strengthening Mechanism And Fretting Wear And Rotating Bending Fatigue Properties Of Ultrasonic Rolling Of New Steel For Shaft
31.	Reasearch On Surface Texturing And Parameters Optimization Of Radical Ultrasonic Rolling Electrochemical Micromachining
32.	Study On Corrosion Behavior Of Surface Modified 904L Stainless Steel In F~- Acid Solution
33.	Study On The Mechanical And Electrochemical Corrosion Resistance Of A291D Magnesium Alloy Strengthened By Laser Shock-ultrasonic Rolling
34.	Study On Strengthening Mechanism And Properties Of Gradient Nanostructures By Ultrasonic Rolling
35.	Study On The Effect Of Ultrasonic Rolling On The Microstructure And Properties Of 316L Stainless Steel And Mg-Al-Zn Alloy
36.	Surface Morphology And Mechanical Properties Of AZ31B Magnesium Alloy Via Ultrasonic Rolling
37.	Investigation On Ultrasonic Warm Rolling Strengthening Technology And Mechanism Of TC11 Titanium Alloy Surface
38.	Research On Microstructure And Properties Of D2 Wheel Steel After Ultrasonic Rolling
39.	Study On The Surface Layer Properties Of Aluminium Alloy 6061 Based On Rotary Ultrasonic Assisted Rolling Process
40.	Effect Of Ultrasonic Rolling On Mechanical Properties Of 3Cr13 Coatings Prepared By Different Thermal Spraying Techniques
<<First <Prev Next> Last>> Jump to