Font Size: a A A
Keyword [Wear resistant]
Result: 1 - 20 | Page: 1 of 10
1. Study On A Wear-Resistant Composite Coating With Bionic Non-Smooth Surface
2. Research On Cr-Mo Surface Wear Resistant LD Steel By Double Glow Plasma Surface Metallurgy Technology
3. Erosive Simulation Analysis And Preparation Of Laminated Composite Pipe With Wear-resistant And Anti-corrosive Properties
4. Research On The Preparation And Performance Of Advanced Wear-Resistant Copper Matrix Composites
5. Research On Plasma Surface Alloying And The Tribological Behavior Of Ti2AlNb-based Alloys
6. Research On The Structures, Properties And Application Of The High Boron Cast Wear-resistant Alloy
7. Study On Preparation And Properties Of Electrodeposited Lubricating Coatings With Coated Particles
8. Research On Rapid Prototyping Forming Technology And Post-treatment Coating With Powder Selective Laser Sintering
9. Fundamental Research On Manufacturing Technology And Properties Of Ni-Based Nano-composite Coatings By Electrophoretic-electrochemical Deposition
10. Study On Nondestructive Test Of Characteristics Of Wear-Resistant Coating And Interface On The Cylinder Liner
11. Microstructure And Interfacial Characteristics Of Wear-resistant Composite Coatings On Copper By Laser Cladding
12. Drill Pipe Joints And Casing Friction And Wear Problems Of Experimental And Theoretical Research
13. Wear-resistant Steel Corrosion And Wear Performance In The Wet Grinding And Cavitation Conditions And Mechanisms
14. Study Of Wear Resistant Coating Technology Applied On Large Thin-Wall Parts By Plasma Spraying Process
15. First-principles Calculations On The Thermodynamic And Mechanical Properties Of Ti-Al-(Zr, Hf)-N Wear-resistant Coating Systems
16. Study On Bonded Solid Lubricant Film
17. Study Of New Compound Wear Resistant Coatings On Cast Iron Component
18. Experimental Study And Design Analysis Visualization For Ceramic/Metal Gradient Wear-Resistant Coatings
19. The Research On Surface Alloying By V-EPC And Application On Guide
20. Studies On The Quality Of 4Cr5MoSiV Steel Forging Die Made By Squeeze Casting
  <<First  <Prev  Next>  Last>>  Jump to