Font Size:
a
A
A
Keyword [White Layer]
Result: 1 - 20 | Page: 1 of 2
1.
The Research On The Temperature Field And Thermal Damage In The Surface Grinding
2.
Surface Integrity For High Speed Machining Of Powder Metallurgy Superalloy FGH95
3.
A Comparative Study Of White Layer Of GCr15 Steel And FALEX Steel On Fretting Wear Under Dry Condition And Grease Lubrication
4.
Study On The Effects Of Grinding Temprature On The Mechanism Of White Layer Formation In Grinding Of Quench Bearing Steal
5.
Research Of The Effects Of Grinding Force On Mechanism Of White Layer Formation In Grinding Of Quench Bearing Steels
6.
Experimental Study On Physical And Mechanical Properties Of GCr15 Bearing Steel In Ultrasonic Assisted Hard Turning
7.
Modelling And Optimization Of Wire-cut Electric Discharge Manufacture White Layer Based On Thermal And Fluid Dynamics Analysis
8.
The Experiment And Numberical Simulation Studies For High-speed Hard Cutting Surface Characteristics
9.
Modeling And Experimental Investigation On Machined Surface Features In Turning Supper Alloy
10.
Dry Hard Cutting Materials To Be Machined Surface White Layer
11.
White Layer In Machining Of H13 Steel And Its Electrochemical Characteristics
12.
Modeling And The Vibration Factor Of Surface Integrity For Hardened Steel Precision Maching
13.
Research On Formation Mechanism Of White Layer In Grinding Of Harden Steel
14.
Prediction And Experimental Research Of White Layer And Residual Stress In High Speed Machining Of Hardened Steel
15.
Machined Surface Integrity For Nickel-Based Superalloy In High-Speed Milling
16.
Research Of White Layers During The Dry Hard Turning Different Hardened State Cr12MoV
17.
Research On Microstructure Formation Mechanism Of White Layer In High Speed Dry-hard Cutting
18.
Investigation Of White Layer And Residual Stress During Hard Turning Of Hardened Steel
19.
A Study On The Surface Microstructure And Property Evolution Of Wheel And Rail By Ultrasonic Impact
20.
An Investigation On The Microstructural Evolution Of ER8C During Sliding Wear Process
<<First
<Prev
Next>
Last>>
Jump to
