Font Size:
a
A
A
Keyword [Work]
Result: 1 - 20 | Page: 1 of 10
1.
Research Into Working Behavior And Self-aligning Methods Of Uniformly Distributed Load Of Rolling Bearing In 2050CVC Hot Tandem Mills
2.
Research Of Safety Mining Techniques Of Shallow Work Face Under Thick Wind Sands
3.
Study On The Theory And Application Of Integrated Drilling Intelligent Decision Support System
4.
On In-Situ Fibrillation Of GEP/PO Blends And Their Morphology, Structure And Properties
5.
Research On Technology Of Twin-cutter NC Turning Programming
6.
Study On The Stability Of Rotating Transfer Under The Control Of Longitudinal Magnetic Field
7.
Studies On National Work Safety Assurance Theory And Application
8.
Study On The Surface Treatment Process Of H13 Type Hot Work Steel And Its Subsequent Thermal Fatigue And Erosion Behaviors
9.
The Wettability Alteration In Oil Reservoir And Its Effect On Porous Flow Process
10.
Research On Crankshaft Parametric Finite Element Analysis System And Design Theory Of Key Parameters In Crankshaft Rolling Process
11.
The Research On Springback Prediction And Its Application Technology In Sheet Forming
12.
Study On Work Safety Process Of Construction Companies Based On Dangerous Point Analysis
13.
Machined Surface Quality For High-Speed Milling
14.
A Research On Clutch Screw Press
15.
The Effect Of Surfactant System On Imbibition Bahavior
16.
Investigation Of Knitting Process And Liquid Moisture Transmitting Properties Of Double-faced Effect Functional Knitted Fabrics
17.
Research On Work Principle And Application Fundamental Of Transducer For Enhancing Oil Recovery Based On GMM
18.
Studies On Hot Work Ability Of Ti53311S,TP650 And Zr-4 Alloy
19.
Mechanical Behaviors And Mechanisms Of Nitrogen Effect Of High Nitrogen Austenitic Stainless Steels
20.
The Influence Of Additional Elements On The Microstructures And Mechanical Properties Of Zr-Cu-base Alloys
<<First
<Prev
Next>
Last>>
Jump to
