Work hardening - Globe Thesis

Keyword [Work hardening] Result: 41 - 60 \| Page: 3 of 10
41.	The Study Of Fe-mn-c Alloys With Experiment And Molecular Dynamic Simulation
42.	304 Austenitic Stainless Steel Cold Hardening And Annealing To Soften The Study
43.	Study On The Design Basis In The High Specific Strength Of Fe-mn Based Austenitic Steel
44.	Study On The Tribology Performance Of BTW Medium Manganese Wear Resisting Steel
45.	Study On Wear Properties And Hardening Behaviors Of Hot-rolled Mn13 Wear-resistant Steel
46.	Effects Of Working Deformation In Room Temperature On The Nitriding Behavior Of 304 Stainless Steel
47.	Research On The Behavior Of Surface Work Hardening In High Speed Cold Rolling Forming Under The Action Of Non-uniform Thermal Coupling
48.	Research On The Microstructure And Property Of ZGMn13 Steelby Modified SiC Nano-Powders
49.	The Effect Of Pre-strain Style On Bake-hardening For Ultra-low Carbon Steel
50.	Micromechanical Behavior Of Ferrite-cementite Structures
51.	Mechanical Behaviors And Microstructural Stability Of High Nitrogen Austenitic Stainless Steel
52.	Investigation On The Nanocrystallization Microstructure And Properties Of Hadfield Steel Induced By High Speed Pounding
53.	Research On Phase Transformation, Microstructure And Mechanical Properties Of Microalloyed Cold-rolled Dual Phase Steel During Continuous Annealing
54.	Mechanical Behavior Study On Solid-state Phase Transformation Of High-strength Low-alloy Steel During Welding
55.	Studies On The Correlation Of Cold-rolled Hardness And Strength Of Austenitic Stainless Steel Sheets With The Cold Rolling Deformation
56.	Study On The Work-hardening Of Magnesium Alloy
57.	Evolution Of Microstructure And Mechanical Properties Of A Fe-30Mn-3Si-4Al Steel Under Deformation
58.	Experimentation And Analysis Of Machined Surface Quality For Cutting304Austenitic Stainless Steel
59.	Influences Of Zn And Sn Contents On Microstructures And Mechanical Properties Of Casting Magnesium Alloys Containing Sn
60.	Machined Surface Integrity For Nickel-Based Superalloy In High-Speed Milling
<<First <Prev Next> Last>> Jump to