Font Size: a A A
Keyword [Zirconia Ceramics]
Result: 41 - 60 | Page: 3 of 5
41. Research On Zirconia Slurry Preparation And Process Of Zirconia Ceramics Fabricated Via DLP Additive Manufacturing
42. Study On Grinding Mechanism Of Zirconia Ceramics By Longitudinal-Torsion Ultrasonic Vibration Milling
43. Preparation And Properties Of Rare Earth Oxides Co-doped Zirconia Ceramics And Coatings
44. Research On The Fabrication Of Zirconia Ceramics Via Stereolithography
45. Study On Preparation And Properties Of Antistatic Ceramics Based 3Y-TZP
46. Study On The Properties Of Zirconia Ceramics Reinforced By Tourmaline Mineral Particles
47. Study On The Preparation And Shape Control Strategy Of Zirconia Ceramics Parts By Stereolithography 3D Printing
48. The Study On Preparation And Color Development Mechanism Of Rare Earth Oxide Doped Zirconia Ceramics
49. Investigation Of Spark Plasma Sintering And Mechanical Properties Of Al2O3/YSZ And Si3N4 Ceramics
50. Study On Coloring And Mechanical Properties Of Zirconia Ceramics
51. Basic Study On The Effect Of Grain Size And Dynamic Fracture Toughness On Grinding Performance Of Zirconia Ceramics
52. Research On Grinding Mechanism Of Ultrasonic Assisted CBN Grinding Wheel For ZrO2 Biological Materials
53. Defect Evolution Of Zirconia Ceramics During Flash Sintering
54. Preparation And Properties Of Aesthetic Zirconia Ceramics
55. Study On The Temperature Field Simulation And Performance Of Microwave Sintered Dental Zirconia Ceramics
56. Mechanical properties of yttria-stabilized zirconia ceramics
57. Dynamic behavior of zirconia ceramics in uniaxial compression
58. Bulk and Interface Thermodynamics of Calcia-, and Yttria-doped Zirconia Ceramics: Nanograined Phase Stability
59. Design and Fabrication of Porous Yttria-Stabilized Zirconia Ceramics for Hot Gas Filtration Application
60. Investigating And Manipulating Macro-microscale Defects In Zirconia Ceramics Fabricated By Stereolithographic Additive Manufacturing
  <<First  <Prev  Next>  Last>>  Jump to