abrasion wear - Globe Thesis

Keyword [abrasion wear] Result: 1 - 20 \| Page: 1 of 2
1.	Study On Technique Of Powder-Feeding Laser Cladding Adulterating Composite Coating With Ceramic And Forming Mechanism Of Coating
2.	The Development Of New Materials And The Behavior Of Corrosion-abrasion Of The Liner Of Wet-grinding Machine In Metallurgical Industry
3.	Research Of The Influence Of Component,Microstructure And Impact Energy On The Impact Corrosion And Abrasion Mechanisms Of Steels Used In Wet-grinding Machine Lining Board
4.	The Influence Of Impact Energy And Impact Angle On The Impact Corrosion And Abrasion Mechanisms Of Steels Used In Wet-grinding Machine Lining Board
5.	Research On The Effect Of Impact Energy To The Impact Abrasion Properties And Mechanisms Of The Wet Mill Liner Materials Used In The Corrosive Condition
6.	Effect Of Cr Content On Impact Corrosion And Abrasion Properties And Mechanisms Of Low Carbon Alloy Steel
7.	Study On The Microstructures And Properties Of Medium Carbon High Boron Ironed Cast Wear-resistant Alloy
8.	The Research On Abrasive Wear Of 60Si2Mn Steel By Alfalfa Powder
9.	Research On Structure And Wear-resistant Property Of Austempered Ductile Iron
10.	Research On Heat Treatment Process Of High Chromium Cast Iron And Impact Abrasive Wear
11.	Effect Of Tungsten On The Mirostructure And Properties Of Hypereutectic High Chromium Cast Iron
12.	Experimental Study On Preparation Technology And Characteristics Of Nano-ceramic Vitrified Bond Super-high Speed CBN Wheel
13.	The Research And Development Of The Flux Cored Wire YD410NiMo For Welding Stainless Steel Turbine Blade
14.	Effect Of Feeding Ca-Mg-RE-Zr Composite Cored Wire During Refining Of Liquid Steel On Abrasive Wear Resistance And Weldability Of High-strength Steels
15.	Research On Several High Residual Poly(Cyclotriphosphazene Amide)s At High Temperature
16.	Research On The Microstructure And Abrasion Wear Of Open Arc Austenitic Hardfacing Alloys
17.	Research On Abrasion Resistance Of Titanium Alloy Ti13Nb13Zr By Laser Shock Texturing
18.	Study On The Purification Equipment And Principle Of Cobalt Block With Oil Pollution
19.	The Structure And Properties Of Ultra-high Molecular Weight Polyethylene Fibers With Enhanced Abrasion Resistance
20.	Study On Impact-abrasion Wear Mechanism Of New Wear-resistant Steel Containing Metastable Austenite
<<First <Prev Next> Last>> Jump to