additive manufacturing - Globe Thesis

Keyword [additive manufacturing] Result: 1 - 20 \| Page: 1 of 10
1.	W Matrix Nanocomposites Prepared By Mechanical Alloying And Selective Laser Melting Fabrication
2.	Composition Detection And Microstructure Analysis Of Laser Additive Manufacturing Of Titanium Alloys
3.	Study On Mechanism Of Interaction Between Laser And Powder Stream During Coaxial Fiber Laser Additive Manufacturing
4.	Effect Of Heat Dissipation Conditions On The Bonding Quality Of FDM Filaments
5.	Study On Microstructure And Property Of Laser Additive Manufacturing Zr-Al-Ni-Cu Amorphous Materials
6.	The Design And Study On Dedust And Recycling System Of Additive Manufacturing Welding Auxiliaries
7.	Investigations On High Deposition-rate Laser Metal Deposition For Additive Manufacturing Application Based On Inconel 718
8.	Study On The Key Technology Of Rapid Forming Casting Molds And Cores By Micro-Jetting And Bonding
9.	Research On Interface Joining Behavior Of Al/Steel Additieve Manufacturing Structure And The Effect Mechanism Of Magnetic Field
10.	Profile Invalidation Additive Manufacturing And Its Key Algorithm Issues
11.	Research On Laser Additive Manufacturing Characeristics Of Titanium Alloy With Powder And Wire
12.	Research On Fiber Laser Additive Manufacturing Tecnology Of IN718Superalloy
13.	Research And Development Of Plastic Additive Manufacturing System Based On Droplet Jetting Technology
14.	Research On Modeling And Optimization Design Method Of Functionally Graded Honeycomb
15.	Optimization Of Patternless Casting Manufacturing Based On Additive Manufacturing Technology
16.	Selective Laser Melting Fabrication Of Nickel-based Superalloys And Its Composites:Process, Microstructure And Property
17.	Contour Recognition Research For Metallic Parts Deposition Shaping Based On Laser Generator
18.	Study On Additive Manufacturing Technology Based On The Principle Of Stationary Shoulder Friction Stir Welding
19.	Study On Mechanical And Machinable Properties Of Wood-plastic Parts Fabricated By Laser Sintering
20.	Numerical Simulation And Experimental Study Of Ni-Base Superalloy By Laser Additive Manufacturing
<<First <Prev Next> Last>> Jump to