alloying elements - Globe Thesis

Keyword [alloying elements] Result: 21 - 40 \| Page: 2 of 10
21.	Influence Of Alloying And Filtration On The Microstructure And Properties Of Casting Al-Mg Alloy
22.	Study On Electrochemical Behavior Of Al-Si Foundry Alloys
23.	Effect Of Alloying Elements Al And Si On Microstructures And Mechanical Properties Of The Ultrahigh Carbon Steels
24.	Research On Effects Of Alloying Elements On Properties Of The Iron Base Corrosion Resisting Alloys
25.	The Effect Of Alloying Elements Addition On The Glass Forming Ability And Corrosion Resistant Properties Of Cu-based Bulk Metallic Glasses
26.	Influence Of Alloying Elements Of Bond Coat Of Thermal Barrier Coatings On Its Interface Conjunction Factors
27.	An Experimental Study On The Mechanical Properties And Ternary Phase Diagram Of Ti-Si Alloys With Different Alloying Elements
28.	Study On The Microstructural Refinement And Oxidation Behavior Of γ-TiAl Alloys
29.	Effect Of Alloying Element Zn, Sn, In On Microstructure And Properties Of 925Ag
30.	Effect Of Zr,Si Alloying Elements On Electrochemical Performance And Dissolution Behavior Of Series Of Al-Zn-In Alloy Sacrificial Anode
31.	Study On Alloying Elements Impact On Microstructure And Property Of The Plasma Arc Welding Layer
32.	Effect Of Growth Rates And Alloying Elements On The Solidification Process Of Al-Fe Alloy
33.	Study On Heat Treatment Of Low Alloy Wear-resistant Cast Steels
34.	Effect Of Technical Parameters On Mechanical Properties Of Bulk Nanocrystalline Fe₃Al Materials Prepared By Aluminothermic Reaction
35.	Effect Of Alloying Elements And Aging On Microstructure And Solder Interface Of Sn-Zn Lead-free Solders
36.	Effect Of Alloying Elements On Indentation Creep Properties Of Heat Resistant Magnesium Alloys
37.	First-principles Calculation For Improving Ductility Of Aluminides By Alloying Elements At Room Temperature
38.	The Effect Of Alloying Elements Addition On Microstructure And Mechanical Properties Of The AZ91D Magnesium Alloy
39.	Study On The Evolution Of Microstructure Of Non-Quenched And Tempered Steel Shafts In The Course Of Cooling After Three Rool Cross-Wedge Rooling
40.	Effect Of Alloying Elements And Annealing On Properties Of Bulk Nanocrystalline Fe₃Al Materials Prepared By Aluminothermic Reaction
<<First <Prev Next> Last>> Jump to