aluminum alloy - Globe Thesis

Keyword [aluminum alloy] Result: 1 - 20 \| Page: 1 of 10
1.	Corrosion Fatigue Mechanism Of High Strength Aluminum Alloy And Full-life Engineering Model For Corrosion Fatigue
2.	Study On The Production Of Heat-resistant Aluminum Alloy Pipe Blanks With Large Dimensions By Multi-layer Spray Deposition
3.	Study On The Process,Devices And Principle Of Multi-Layer Spray Co-Deposition Technology For The Preparation Of Large-Sized SiC Particulate-Reinforced Aluminum Alloy Composites
4.	The Process And Mechanical Properties Of High Silicon-content Aluminum Alloy By Multi-Layer Spray Deposition Technology
5.	Studies Of Electromagnetic Casting Technology
6.	The Effect And The Mechanism Of Static Electric Field On Aluminum Alloy
7.	Computer Simulation Of Grain Structure Formation In Solidification Of Aluminum Alloy And Superalloy Castings
8.	Study Of Technique Optimization And Structure Property Of Electromagnetic Continuous Casting
9.	The Theoretical,Experimental & Practical Research On Rheological Forming Of Metals
10.	Study On The Technique And Simulation Of The Thixo-Forming Of Aluminum Alloy
11.	The Basic Study Of Gas Film Soft-contacted Continuous Casting Technology
12.	The Study On The Non-dendritic Structure Of Aluminum Alloy
13.	Study On The Rheological Behavior And Gates Of The Thixoforming Of Semi-Solid Aluminum (A356) Alloy
14.	Study On Microstructures And Mechanical Properties Of Heat Resistance Aluminum Alloy 2618
15.	Study On Microstructures And Properties Of Rapidly Solidified AlFe VSi Heat-Resistant Aluminum Alloy And Preparation Techniques Of Its Large-Size Products
16.	Study On Key Technologies Of Aluminum Alloy Sheet Warm Forming
17.	Fatigue Behavior And Fatigue Life Prediction Of Metals Under Multiaxial Cyclic Loading
18.	Study On Continuous Casting Of Aluminum Alloys Under Low-frequency Electromagnetic Field
19.	Technique And Theory Of Semi-continuous Casting Of Aluminum Alloys Under Low-frequency Electromagnetic Field
20.	The Researches On Deformation And Fracture Behaviors Of Porous Materials Prepared By Spray Deposition During Compression And Rolling
<<First <Prev Next> Last>> Jump to