Font Size: a A A
Keyword [and pressure]
Result: 21 - 40 | Page: 2 of 10
21. Damage And Fracture Of Stainless Steel Furnace Tubes Serviced In The Environment Of Hydrogen With High Temperature And Pressure
22. The Testing Study Of Temperature Limit And Pressure Drop For Oil-gas-water Mixed Transportation During Extracting Oil Of Highly-Watery
23. The Flow Pattern And Pressure Drop Testing Research For Oil-gas-water During Oil Producing With Supper High Water-Cut
24. The Application And Study On The Flow Velocity Forecast Method On Sampling And Analyzing Of The Flue Dust Concentration In High Temperature And Pressure In Oil Refinery
25. Electrosynthesis Of B2O With Diamond-like Structure At Ambient Temperature And Pressure
26. Electrochemical Synthesis Of Diamond And Diamond-like Materials Under Ambient Temperature And Pressure
27. Study On High Temperature And Pressure ESP Performance Testing System Design
28. Study On The Influences Of Plastic Flow On Microchannel Formation Under Temperature And Pressure
29. The FEM Simulation And Pressure Infiltration Of Al2O3p/ZL104 Composites
30. Studies On Gas-Liquid Mass Transfer And Pressure Drop Characteristics Of Rotor-Stator Reactor
31. The Principle Of Solid Conveying And Pressure Building During Centrifugal Extruder
32. Simulation On The Temperature And Pressure Field Of CVD Diamond Blunt Aircraft Under Flight
33. Research On The Method Of Wellbore Temperature And Pressure Calculation During Deep-water Drilling
34. The Mechanical Study Of Testing String In DeepWell
35. Flow Pattern Identification And Pressure Drop Calculation On Three-Phase Flow In A Horizontal Pipeline
36. Silk Degumming With High Temperature And Pressure And Finish Of Cotton Fabrics With Sericin
37. The Flow Pattern And Pressure Transient Characteristics Of Regenerative Annular Furnace At Cold State
38. Study On High Strength Cast Al-Mg-Zn Alloy
39. Preparation Of Polymer Latex And Study On Structure-property Relation Of Latex Particle Morphology And Pressure-sensitive Properties
40. Study On Design And Optimization Of Stamping Force And Pressure Center For Progressive Die
  <<First  <Prev  Next>  Last>>  Jump to