austenitic steel - Globe Thesis

Keyword [austenitic steel] Result: 21 - 40 \| Page: 2 of 4
21.	Effect Of W Content On Microstructure And Properties Of Sanicro25 Steel
22.	Study On Wear Properties And Strengthening Mechanism Of Hardening Medium Manganese Austenitic Steel Induced By Deformation
23.	Study On Bending Fatigue Behavior Of Cr-Mn Austenite Stainless Steel
24.	Study On Deformation Behavior Of High Nitrogen Austenitic Steel
25.	Microstructural Control For Enhancing The Mechanical Properties Of High Mn Austenitic Steel At Ambient And Cryogenic Temperatures
26.	Study On Microstructures And Mechanical Properties Of High Carbon And High Manganese Austenitic Steels
27.	Multi-scale Microstructure Control And Strengthening-Toughening Mechanism Of Ultra-high Strength Austenitic Steel
28.	Optimizing The Microstructure And Mechanical Properties Of The Cold-Rolled Austenitic Steel By Electropulsing Treatment
29.	The Research Of Gas Metal Arc Welding Of High Nitrogen Austenitic Steel And High Strength Martensitic Steel
30.	Research On Welding Thermal Simulation Of Fe-Ni Based Austenitic Steels
31.	Microstructures And Low Temperature Tensile Properties Of Friction Stir Welding Joints Of Nitrogen Strengthening High Manganese Steel
32.	Study On The Formation And Property Of Carburized Or Borided Layer On Stainless Steel
33.	Preparation Of Nanostructured Austenitic Steel By ECAP Method And Its Thermal Stability
34.	Research On A Kind Of Austenitic Steel Used In The Boiler Of Ultra-supercritical Power Plant Above 700℃
35.	Machining Hardening Mechanism And Grain Coarsening Toughening Mechanism Of Nitrogen-strengthened High Manganese Austenitic Steel
36.	Study On Microstructures And Properties Of Austenitic Steels After High Pressure Heat Treatment
37.	Seccond Phase Precipitation Behavior Of Ultra-high Nitrogen Austenitic Steel Containing Niobium And Vanadium
38.	Fatigue Crack Growth Analysis of 3D Printed Type 304 Stainless Stee
39.	Structural and Magnetic Studies of an Ex-service Cast Austenitic Steel Tube Used in Hydrogen Reformers
40.	Synthesis of aluminum-rich coatings on new high-temperature cast austenitic steel CF8C-Plus by a pack cementation process
<<First <Prev Next> Last>> Jump to