austenitic steel - Globe Thesis

Keyword [austenitic steel] Result: 41 - 60 \| Page: 3 of 4
41.	Research On Microstructure And Properties Of T/P92 Dissimilar Materials Joints In USC Boilers
42.	Research On Mechanism And Influence Factors Of Carbon Migration For Pearlitic Steel And Austenitic Steel Dissimilar Joint
43.	Ion Irradiation Damage Of Tungsten,Reduced Activation Steel And Austenitic Steel
44.	Research On Microstructure And Mechanical Properties Of High Manganese Austenitic Steel For LNG Storage Tanks
45.	Precipitation Behavior Of Cu-rich Nanoscale Phase And Strengthening Mechanism In High Manganese Austenite
46.	Strengthening Mechanism Of Mo-containing High Manganese Austenitic Steel
47.	Experimental Study On Strength Of Austenitic Steel Small Header In 630℃ Ultra-Supercritical Unit
48.	Research On Composite Structure And Properties Of High Strength Martensitic Steel-High Plasticity Austenitic Steel
49.	First Principles Calculation Of Generalized Stacking Fault Energy Of FCC Fe-Mn-C Alloy
50.	Hot Deformation Behavior And Properties Of Nb-V Ultra-high Nitrogen Austenitic Steel
51.	Effect Mechanism Of Tensile Stress On The Oxide Scale Formation Of Steel For Power Plant In Supercritical Water
52.	Study On Intergranular Corrision And Grain Boundary Characteristic Distribution Of TP321 Austenitic Steel
53.	Simulation Study On The Microstructure And Hot Cracking Sensitivity Of Continuous Cast Billets Of S31042 Austenitic Heat-resistant Steel
54.	Study On Microstructure And Properties Of Steel With Superior Strength And Ductility Designed By A Novel SFE-dependent Strategy
55.	Creep Damage Mechanism And Evaluation Method Of The Ultra Supercritical Austenitic Heat Resistant Steel
56.	Study On Microstructure And Properties Of Nb-V Microalloyed Fe-Mn-Al-C Austenitic Steel
57.	Reverse Transformation Of Deformation Induced Martensite In High Manganese Austenitic Steel
58.	Investigation On Microstructure And Properties Of Plasma Arc Additive Repair Layer Of Bainite Steel Rutted Fork
59.	Study On Process And Method Microstructure And Properties Of Wire-powder Hybrid GMAW Additive Manufacturing For High Nitrogen Austenitic Steel
60.	Study On Effect Of Ti On Wear-Resistant Properties Of Medium Manganese Austenitic Steel
<<First <Prev Next> Last>> Jump to