Font Size: a A A
Keyword [blades]
Result: 1 - 20 | Page: 1 of 10
1. The Study On Precisely Cathode Design System Of Turbine Blades And Experiments In Electrochemical Machining (ECM)
2. Evaluation And Manufacture Of Grading Bamboo And Chinese Fir Laminated Lumber Of Wind Turbine Blades Materials
3. Investigation On The Electron Beam Brazing Repair Of K465 Ni-base Superalloy Blades And The Crack Control Technology
4. The Study On High-performance Bamboo-wood Composite Material For Wind Turbine Blades
5. Research On The Mechanics Performance Of Diamond Saw Blade With Special Structure
6. Study On The Heat-treatment Of ZG0Cr16Ni5Mo Used On Hydraulic Turbine Blades
7. Research On The Static And Dynamic Characteristics Of Multi-axes Blades Grinding Machine Tool
8. Research On Numerical Control Electrochemical Machining Technology Of The Integral Impeller With Big-twisted Blades
9. Research Of Grinding Capability Of Coated Abrasive Belt In Grinding The Material Of Gas Turbine Blades
10. Design And Analysis Of Impeller Blade
11. Research On The Effect Of The Structure Of Tungsten Circular Saw Blades On Noise
12. Experimental Study On Dynamic Characteristics Of Diamond Saw Blades For Noise And Vibration Reduction And Micro-Failure Mechanism
13. Study On The Microstructure And Properties Of 316L Stainless Steel Deposition Layer On The Turbine Blades Steel By High-energy Micro-arc Deposition Technology
14. Chaotic Simulation And Experimental Research Of The Flow Field Stirred By Dislocated Blades
15. Study On Filling Performance Of Alumina Based Ceramic Cores For Investment Casting Super Alloy Blades
16. Experiment Study On Milling Chatter Of TC11 Titanium Alloy Integrated Impeler Blades
17. Design Of Large-Scale Composite Mould With Inside Circulating Water Heating System
18. Research Of Relationship Between Carbide Change And Remaining Life Of Gas Turbine Blades
19. Overheating Damage Analysis On Turbo-disk And Turbo-blades Used In Locomotive Turbocharger Heated By High-temperature And Short-time
20. Study On Flank Milling NC Machining For Ruled Surface Blades
  <<First  <Prev  Next>  Last>>  Jump to