casting defects - Globe Thesis

Keyword [casting defects] Result: 1 - 20 \| Page: 1 of 3
1.	Experimental Analyses On Solidified Structures And Mechanical Properties Of Centrifugal Precision Titanium Castings
2.	The Defeats Analysis Of Magnesium Alloy Die-castings
3.	Effect Of Coating's Wetting Ability For Liquid Polystyrene On Casting Defects
4.	Research On The Casting Properties Of Ti-43Al-9V Intermetallic Compounds
5.	The Key Technology Of Preparation Of Natural Gas Compressor Block Castings
6.	Research On Casting Technology And Defects Of Casting Aluminum Alloy
7.	Study On The Bonding Behavior Of Void Casting Defects During Forging And Rolling Process
8.	Influence Of Second Phase And Defects On The Corrosion Resistance Of Magnesium-manganese-calcium Alloy
9.	Casting Defect Diagnosis Based On Genetic Algorithm, Neural Network Model
10.	Az91 Magnesium Alloy Disappeared Casting Process
11.	Analysis And Control Of The Main LPDC Defects Of Aluminum Alloy Wheels
12.	Control Of Casting Defects And Solidification Numerical Simulation Of Cast Steel Sleeves
13.	Numerical Three Reconstruction Of Cast Defects And Effect Of Cast Defects On Service Performance Of Casting
14.	Development Of Mg-Mn-Ca/Mg-Mn-Ca-Sr Biomedical Magnesium Alloy And Investigation On The Effect Of Casting Defects On The Properties Of Magnesium Alloys
15.	Numerical Simulation Studies On Casting Process And Effects Of Process Parameters For Horizontal Centrifugal Compound Casting Rolls
16.	16PA6-280Type Diesel Engine Block Resin Bonded Sand Foundry Technique And Fitted Research Out
17.	Process Optimization And Defects Prevention Of Railway Steel Casting With Green Moulding Clay Sand
18.	Stdudy On Investment Casting Stress And Defects Of Ti-48Al-2Cr-2Nb
19.	The Research On The Die Casting Process Of Hypoeutectic Al-Si Alloy AlSi10Mg
20.	Study On The Preparation, Casting Defects And Properties Of A New Kind Of Nickel Based Single Crystal Alloy
<<First <Prev Next> Last>> Jump to