Font Size: a A A
Keyword [centrifugal]
Result: 1 - 20 | Page: 1 of 10
1. Electro-deposition Processes, Microstructures And Properties Of Ni-P & (Ni-P)-SiC Coatings
2. Novel Centrifugal Extraction-stripping Process-Treating Spent Etchant From Printed Circuit Board Industry Environmentally Friendly
3. Fundamental Research On Multilayer Coil Planet Centrifugal Process And Its Application
4. Investigation Of High Speed Steel Centrifugal Composite Casting Roll
5. Investigation Of Properties And Forming Mechanism Of Graded Structure Of Heavy Cross-sectional WC_p/Fe-C Composites
6. Study On The Process And Pharmacology Of Nano Radix Salvia Miltiorrhiza Fabricated By High Speed Centrifugal Sheering Technology
7. Fabrication On Ceramics With Graded Pores By Centrifugal-gelcasting Technique
8. Theory Study And Development On The Nested Screw Novel Extruder
9. Study On Technology Of Investment Cast For Titanium Alloy Using Low Cost Oxide Ceramic Mould Shell
10. Design Of Graded Composite Brake Disc And Research Of Processing, Microstructure And Properties During Fabrication And Forming
11. Manufacture Technology Of The Centrifugal Casting Cylinder Liner Of Al Based Discontinuous Gradient Function Composites Reinforced With In-situ Particles
12. Study On The Froth Transportation And Distribution Of Self-Suction And Closed Type For Flotation Column
13. Technology Of Iron Recovery From Iron Tailings Residue By Continuous Centrifugal Concentration
14. Theroretic Analysis And Simulation Of Centrifugal Barrel Finishing Based On Three-Dimensional Discrete Element Method
15. Study On The Relation Of Roof Stress Accumulation And Coal Pillar Stress Change Of The Deep Buried Coal And Influenced By Fault
16. Ordered Porous Al2O3 Matrix Ceramics And 3D Interpenetrated Al2O3/Epoxy Composites
17. Large Eddy Simulation On Turbulence Of Molten Steel And Behavior Of Gas/Liquid Two Phase Flow Affected By Alternative Magnetic Field
18. Study On A Centrifugal Microfluidic System For Rapid Analysis Of Environmental Pollutants
19. Research On Structures And Properties Of Pistons Of SiC Particle Locally Reinforced Aluminum Composite Formed By Centrifugal Casting
20. Behaviors Of Mold-Filling And Solidification For Vertical Centrifugally Cast TC4 Alloys
  <<First  <Prev  Next>  Last>>  Jump to