Font Size:
a
A
A
Keyword [ceramic cutting tool]
Result: 1 - 20 | Page: 1 of 3
1.
Design And Development Of Self-lubricating Ceramic Cutting Tool And Study On Its Self-lubricating Mechanism
2.
Design And Development Of In-situ Reaction Self-lubricating Ceramic Tools And Study On Their Antifriction Mechanisms
3.
Al
2
O
3
Based Nanocomposite Ceramic Cutting Tool Material And Its Cutting Performance
4.
Development Of Si
3
N
4
/TiC Nano-composites Ceramic Tool Materials And Study On Their Performance
5.
NC Hard-cutting Of GCr15 Roll And Its Application
6.
Development Of Layered Ceramic Composite Cutting Tools And Study On Their Cutting Performance
7.
Study On Al
2
O
3
/TiB
2
/CaF
2
Self-lubricating Ceramic Cutting Tools
8.
The New Al <sub> 2 </ Sub> The O <sub> 3 </ Sub>-based Ceramic Cutting Tool Material On The Tribological Behavior
9.
Preliminary Study On Fabrication And Mechanical Properties Of Low Expansion Quasi Ceramic Cutting Tool Material
10.
Study On SiC Whiskers And Nanoparticles Synergistically Toughening Al
2
O
3
-bascd Ceramic Cutting Tool And Its Cutting Performance
11.
Development Of Nano CaF
2
Self-lubricating Ceramic Cutting Tool Materials And Its Properties
12.
Study Of The Ceramic Cutting Tool Synergism Modified By Nano-sized Solid Lubricant And Gradient Design
13.
Study Of Core-Shell Coated Self-Lubrication Ceramic Cutting Tool And Its Cutting Performance
14.
Study On The Cutting Performance Of Alumina Based Nanocomposite Ceramic Cutting Tool
15.
Development Of Graded Self-lubricating Ceramic Cutting Tool Material And Its Friction And Wear Mechanism
16.
Study On In-situ Fabrication Of Ceramic Cutting Tool Materials And Cutting Performance
17.
Study On Preparation And Properties Of Si
3
N
4
Matrix Ceramic Cutting Tool Materials
18.
Fabrication And Cutting Performance Of New Si
3
N
4
-based Micro-nano Composite Ceramic Cutting Tool
19.
Study On Development Of Al
2
O
3
-TiC Micro-laminated Composite Ceramic Tool Materials And Cutting Performance
20.
Research On Carbon Nanotubes Toughen Alumina Ceramic Cutting Tool Materials
<<First
<Prev
Next>
Last>>
Jump to
