Font Size:
a
A
A
Keyword [ceramic cutting tools]
Result: 21 - 36 | Page: 2 of 2
21.
Study On Fabrication And Cutting Tool Wear Reliability Of Al
2
O
3
-based Composite Ceramic Tools Based On Defect Control
22.
Development And Cutting Performance Of Bionic Structure Ceramic Cutting Tools
23.
Study On Alumina Based Self-lubricating Ceramic Cutting Tools Added With Nickel Boron Coated Calcium Fluoride Composite Powder
24.
Experimental Research Of Al
2
O
3
-TiC Micro-textured Ceramic Tools By In-situ Molding Process
25.
Study On Fabrication And Properties Of Ceramic Cutting Tools For High Speed Machining Nickel-based Superalloys
26.
Study On Al
2
O
3
-Ti(C,N)-(W,Ti)C New Composite Ceramic Tools
27.
Studies On Preparation And Properties Of Si
3
N
4
Ceramic Cutting Tools Material With Al
2
O
3
-y2o3 And MgO-Y
2
O
3
Additives
28.
Development Of Gradient Self-lubricating Ceramic Cutting Tools And Study On Their Cutting Performance
29.
Study On The Preparation And Performance Of Ceramic Cutting Tools Based On High Temperature Mechanical Behavior
30.
The Simulation And Optimization On The Microtextured Ceramic Cutting Tools Of Al
2
O
3
-T
i
C With In-situ Forming
31.
Fabrication Techniques And Cutting Performance Of Micro-textured Self-lubricating Ceramic Cutting Tools By In-situ Forming Of Al
2
O
3
-TiC
32.
The Influence Of Microwave Field Load On The Sintering Performance Of Alumina-based Ceramic Cutting Tools
33.
Research On Microwave Sintering And Cutting Performance Of Multi-scale Particle Composite Al
2
O
3
Based Ceramic Tools
34.
Fabrication And Performance Of Graphene/Ceramic Tools For High Speed Machining Nickel-Based Superalloys
35.
Technology Design And Preparation Of Ceramic Cutting Tools Based On Simulation Of Microstructure Evolution
36.
Preparation And Application Of Al
2
O
3
-based Composite Ceramic Cutting Tools Machinability Study
<<First
<Prev
Next>
Last>>
Jump to
