Font Size: a A A
Keyword [cleavage fracture]
Result: 1 - 20 | Page: 1 of 2
1. Investigation On Microstructures And Properties Of Magnesium Heat Resistant Alloys With Nd Additions
2. Study On Microstructure, Performance And Relative Theory Of Boron-doped Diamond
3. First-Principles Study Of Mechanical, Electronic And Optical Properties Of BiMO3, Nb4SiC3 And Doped Cr2Nb
4. The Effects Of Initial Damage On The Cleavage Fracture Behavior Of Notched Specimens With Different Microstructures Of Steels
5. Study On Fatigue Properties Of A New Type Austenitic Stainless Steel
6. Analysis On Mechanism Of Cleavage Fracture In A Low Alloyed Steel At Different Low Temperature
7. Study On Hydrogen-induced Cleavage Fracture Of X80 Pipeline Steel
8. Cleavage Fracture Of Mica And Its Application In Pearlescent Pigment
9. Analysis On Mechanism Of Cleavage Fracture At The Lower Shelf Of Ductile-to-brittle Transition Of A Low Alloyed Steel
10. The Influence Of Specimen Geometry Dimensions And Load On The Local Cleavage Fracture Stress f
11. Prestrain On The Fracture Behavior Of Notched Specimens Of Different Organizations Alloy Steel
12. The Influence Of Loading Rate On The Fracture Behavior Of Different Gap Size And Loading Mode Sample
13. The .16 Mnr Steel, Ductile-brittle Transition Cleavage Fracture,
14. Prediction Of Fracture Toughness In The Ductile-to-brittle Transition Region Of Pressure Vessel Steels
15. Research On Feasibility Of Evaluation Of Fracture Toughness In The Ductile-to-brittle Transition Region Of Q345R By Small Punch Tests And Beremin Model
16. Bainite Transformation Characteristics And Fracture Micromechanism Of Q690CF Steels Under The Welding Thermal Cycle
17. In-situ Fabrication、Aging Behaviors And Mechanical Properties Of Mg2Si/Mg-Sn Composites
18. Study On Stress Corrosion Property And Electrochemical Corrosion Property Of Spray Forming7055Aluminum Alloy
19. A Study Of Strength And Toughness For An Ultrafine-grain Size Ferrite/Cementite Steel
20. Research On Grit Wear Process And Monitoring Technique Of Grain Wear In Single-grit Grinding
  <<First  <Prev  Next>  Last>>  Jump to