co-injection molding - Globe Thesis

Keyword [co-injection molding] Result: 1 - 20 \| Page: 1 of 2
1.	Research Of Multi-Material Molding & Its CAD/CAE
2.	Based CAE Software Investigated The Co-injection Process
3.	The Numerical Simulation And Experimental Study Of Gas-assisted Co-injection Molding
4.	The Numerical Simulation On Water-assisted Co-injection Molding Process
5.	Study On Numerical Simulation Of Co-injection Molding
6.	The Research Of Sequential Co-injection Molding Based On Numerical Simulation
7.	The Intelligent Optimization And Control Of Co-injection Molding
8.	The Numerical Simulation And Experimental Study On Water-assisted Co-injection Molding Of Polymer
9.	The Influences Of Material Combination And Process Parameters On The Quality Of Co-injection Molded Parts
10.	Numerical Simulation And Experimental Study On Gas-assisted Co-injection Molding Process
11.	Research On Structure And Properties Of PP/HDPE Foamed Products By Co-injection Molding
12.	Numerical Simulation Investigation Of Water-Assisted Co-Injection Molding Process Based On The Finite Volume Method
13.	Coinjection Molding CAE Analysis And Simulation Research Of Thick Wall Products
14.	Numerical Simulation Based On A Viscoelastic Constitutive Model And Expeirmental Study On The Filling Stage Of Overlfow Water-assisted Co-injection Molding Process
15.	Structures And Properties Of Isotactic Polypropylene And Its Composites Molded By Sequential Co-injection Molding
16.	Study On Numerical Simulation And Cylindritic Structures Of Co-injection Molded Polypropylene Parts
17.	Based On Two Dimensional With Genetic Algorithm (ga) Powder Injection Molding Filling Process Numerical Simulation Research
18.	The Co-MIM Preparation Of Gradient Cemented Carbide And Research Of Sintering Densification
19.	Study Of The Morohology And Mechanical Properties Of Fluid-assistant Co-injection Molding Pure Resin Parts
20.	Numerical Simulation Of Co-injection Molding And Rheological Behavior Of Polymer Melt
<<First <Prev Next> Last>> Jump to