Font Size: a A A
Keyword [composite rolling]
Result: 1 - 20 | Page: 1 of 2
1. The Effect Of Composite Rolling Process On The Composition, Microstructure And Properties Of The Metallurgical Bonding Of Al And Mg
2. Research On Rolling Process Of Wear-resistant And Carbon Steel
3. .al / Mg / Al Laminated Composite Rolling Composite Technology
4. Mechanical Properties Of Aluminum-magnesium Laminated Composite Calculation And Rolling Composite Technology,
5. .cu / Al Laminated Composites Combine The Mechanism And Interfacial Reaction
6. Microstructure And Mechanical Property Of Clad Plate Of Stainless Steel By Vacuum Composite Rolling
7. The Composite Rolling Experiment And Finite Element Simulation Of The Iron Scrap With Stainless Steel Coating
8. Research On Fabricating AZ61Magnesium Alloy Sheets With Extrusion Composite Rolling Process
9. Research Of The Cold-rolled Composite Technics Of The Bimetal Products Which Thickness Is Not Less Than2.0mm
10. Study On Cross Wedge Rolling Uneven Temperature Field Composite Rolling Elongated Conical Step Shaft
11. Heavy Plate Composite Rolling Of The Turnover Machine Stress And Temperature Coupling Analysis And Structure Optimization
12. Preparation Of In Situ （ZrB2+Al3Zr） Particles Reinforced2024Al Matrix Composites
13. Finite Element Simulation Of Composite Rolling Of Stainless Steel/Iron Scrap
14. Study On The Technology And Performance Of Preparation Of Lead / Steel Laminated Composites By Rolling
15. Study On The Strengthening Mechanism Of Surface Heating Assisted Ultrasonic Composite Rolling HIP Ti-6Al-4V Alloy
16. Research On Bimetal Strip Solid-liquid Composite Rolling-cast Process
17. The Hot Roll Bonding Process And Interface Diffusion Of 5A06Al/AZ31Mg Laminated Composites
18. Study On Rolling Deformation Behavior Of B4CP/6061Al Composite
19. Plastic Deformation And Properties Of In-situ Nanoparticle Reinforced ZrB2/6061 Aluminum Matrix Composites
20. Study On Deformation Law And Interface Combination Of Ti/Mg Multi-layer Rolled Composites
  <<First  <Prev  Next>  Last>>  Jump to