concentration - Globe Thesis

Keyword [concentration] Result: 1 - 20 \| Page: 1 of 10
1.	A Study On The New Methods For The Determination Of Heparin And Some Physicochemical Parameters By Resonance Rayleigh Scattering And Resonance Nonlinear Scattering
2.	Studies On High-Density Cultivation And Concentrated Cultures Of Lactic Acid Bacteria
3.	Composition Design And Properties Of The Zr-Al-Ni-Cu Bulk Metallic Glasses
4.	Formation Criteria Of Ternary Quasicrystals And Their Applications In The Al-Ni-Fe And Ti-Zr-Ni Systems
5.	Research On Preparation Of Waterborne Polyurethane Nanp-Anionomers And Their Application As Composites
6.	Study On The Mechanism Of Adsorption At The Liquid-solid Interface And Renaturation Of Lysozyme In Liquid Chromatography
7.	Gas-Solids Two Phase Flow Dynamics In Circulating Fluidized Bed Risers
8.	Production Of Amorphous From Stable Quasicrystals
9.	Application Of The On-line Sweeping Concentration Technique And The Frontal Analysis To The Study Of Pharmacokinetics
10.	Investigation On Tensile Properties Of Geotextiles For Application
11.	Applied Base Studies On Higher Concentration Inorganic Polymer Polyferric Chloride
12.	Research On Polymer Monolithic Stationary Phases For Capillary Electrochromatography
13.	Investigations On The Relationships Of Indoor And Outdoor Air Pollutant Concentrations During The Evolution Process
14.	Study Of Flow And Heat Transfer And Fouling Preventing And Removing In Circulating Fluidized Bed Heat Exchanger
15.	Research On Efficiency And Mechanism Of A-step In AB Process For Municipal Wastewater Treatment
16.	Study On The Process Of Thickening Low Concentration Excess Activated Sludge By Cavitation Air Floatation
17.	Study On Two-phase Anaerobic & Active Sludge Technology For Chinese Traditional Medicine Wastewater Treatment
18.	Relationship Between The Antibacterial & Immunologic Activity Of Houttuyfonate Homologues And Their Surface Activities
19.	A Study On Modeling Of Mass-Transfer In RPB
20.	Study Of Fatigue Behavior And Mechanism Of Fatigue Failure In The Ultra-High-Cycle Regime In 40Cr And 50 Axles Steels
<<First <Prev Next> Last>> Jump to