conformal cooling - Globe Thesis

Keyword [conformal cooling] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Key Technologies In Rapid Manufacturing Process Of Zinc-based Alloy Moulds
2.	Research On Key Technology For Rapid Development Of Precise Plastic Product
3.	The Design Theory And Methed Of Precise Injection Mold For The Drip Emitters
4.	Studies On The Design And Manufacturing Of Plastic Injection Mold With Conformal Cooling Channels
5.	Optimal Design Of Conformal Cooling Channels With Brone Pipe Buried Cast For Inject Mould
6.	Research On The Effect Of Conformal Cooling On Injection Molding Part Warpage
7.	Research On Optimal Design And Rapid Manufacturing Of Injection Mold Based On Conformal Cooling
8.	Study On Key Technologies Of The Injection Mold With Conformal Cooling Channels Based On Buried Technique
9.	Studies On The Design And Manufacturing Technology Of Injection Mold With Conformal Cooling Channel Based On 3D Printing
10.	Study On Rapid Manufacturing Of Hard Injection Mold With Conformal Cooling Channels
11.	Study On The Optimization And Mold Parting Method Of Conformal Cooling Channels For Injection Mold
12.	Research On Thermal Response Of Mould Conformal Cooling Structure Effect On Non-uniform Thick-wall Product Precision Forming
13.	Research On The Thermodynamic Behavior Of Ultra Thick-wall Solid Product Injection Molding With Conformal Cooling
14.	Investigation On Design And Forming Process Of Lattice-structure Conformal Cooling Channels In Plastic Injection Mould
15.	Research On Key Technology Of Rapid Tooling Based On 3D Printing
16.	Research On Design And Manufacture Of Injection Mold With Conformal Cooling Channel Based On Selective Laser Melting
17.	Research And Application Of Intelligent Matching Design Method For Injection Mold Cooling System
18.	Selective Laser Melting Of Maraging Steel And Its Composite,Gradient Materials
19.	The Design And Property Of Conformal Cooling Channels Fabricated By Selective Laser Melting
20.	Analysis And Research Of Enhancing Heat Transfer With Conformal Cooling In Injection Mold
<<First <Prev Next> Last>> Jump to