cutting deformation - Globe Thesis

Keyword [cutting deformation] Result: 1 - 20 \| Page: 1 of 2
1.	Three-dimensional Stability And Deformation Of Thin-walled Part In High Speed End Milling
2.	Fundamental Research On Machinability Of Titanium Alloy By Thermohydrogen Treatment
3.	Reaseach On Cutting Mechanism Of Hardened Steels
4.	Deformation And Vibration Simulation Of The Key Parts Of Turning System Of Large Cylindrical Shell
5.	Study On Laser Assisted Milling Of Nickel-base Superalloy K24Technology
6.	Research On Related Mechanism And High Efficiency Cutting Technology In Machining Nickel-based Superalloy GH4169
7.	Simulation And Experimental Study Of Cutting Deformation Of Thin-walled Parts
8.	Parametric Optimization Of High-accuracy Low-rigidity Part In Multi-step Machining
9.	Study Of Relevance Between Tool-Path And Machined Residual Stress State
10.	Study On Thermal Distribution Characteristics Of Cutting Deformation Zone Under Heavy Load Cutting Condition
11.	Simulation And Experimental Study Of Micro Milling Machining Deformation Based On Thermal-Mechanical Coupling
12.	Error Compensation Methods Of Cutting Deformation For Thin-walled Parts With The Fillet-end Mill Cutter
13.	A Study On The Influence Of Cutting Deformation Of Thin-walled Parts Processing Based On FEM
14.	Research On Cutting Mechanism Of High Speed Cutting GH4169 Based On Multi-scale Simulation
15.	Study On Cutting Deformation Of High Speed Cutting GH4169
16.	Deformation Mechanism And Experimental Research Of Typical Polycrystalline Metal Micro Cutting
17.	Microscopic Mechanism Study On Deformation Zone Of Vibration Cutting
18.	Influence Of Both Surface Roughness Of Carbide Inserts And Cutting Parameters On Residual Stresses In Thin-Walled Cylinder Turning
19.	Catastrophe Modeling Of Chip Flow Angle In Cylindrical Cutting With 2d Cutting Deformation Parameters And Research On The Experimental Phenomena
20.	Study On Vacuum Clamping And Flying-cutting Deformation Of Copper Planar Parts
<<First <Prev Next> Last>> Jump to