cutting forces - Globe Thesis

Keyword [cutting forces] Result: 1 - 20 \| Page: 1 of 4
1.	The Mechanism And Technology Of Hard Turning With PCBN Tool
2.	Research On High Speed Milling Of High-performanced Graphite
3.	Study On High Speed Cutting Hardened Steel With The Coated Insert (CN35)
4.	Deformation In Orthogonal Micro-cutting Based On Strain Gradient Plasticity Theory
5.	Error Compensation For Complex Surfaces Machining Based On Cutting Forces Modeling
6.	A Study On Cutting Rules And Application Of High Speed Milling NAK80
7.	Research On High Speed Milling Forces And Cutter Path Optimizing
8.	Numerical Simulation Of Cutting Forces Generated By Drills With Indexable Inserts And Optimization For Drill Parameters
9.	Study On Chip Formation In The Nodal Zone In Bamboo Cutting
10.	Modeling And Analysis Of Cutting Force For Turn-Milling Non-Axisymmetric Workpiece
11.	A Study On The Mechanism And Some Questions Of High Speed Machining
12.	Feedrate Scheduling Based On Predictive Force Model For NC Machining
13.	On The Dynamics Of The Milling Of Ball End Milling: Modeling Of Cutting Forces And Simulation
14.	Modeling Of Cutting Forces And Surface Roughness, And Parameter Optimization During High-Speed Machining Titanium Alloy
15.	Modeling And Analysis Of Cutting Forces In Orthogonal Turn-milling Of Shaft Parts
16.	The Simulation And Experimental Research On SiCp/Al Composite
17.	Study On Micro Milling Force And Process Of7075-T6Aluminum Alloy
18.	Simulation Study Of The Mechanical Properties And Geometry Of The Micro-cutter
19.	Process Optimization In High-efficiency Turning Inconel 718
20.	Parameter Optimization Of Precision Milling Of Aviatic Titanium Alloy Structure Part
<<First <Prev Next> Last>> Jump to