deep hole machining - Globe Thesis

Keyword [deep hole machining] Result: 21 - 40 \| Page: 2 of 3
21.	Research On Symmetrical Deep Hole Machining Tool System Based On The Hydrodynamic Lubrication Mechanism
22.	Research On Formation Mechanism And Optimization Scheme Of Roundness Error In Deep Hole Machining Of Gun Drilling
23.	Research On Micro Deep Hole Machining In Micro Electric Discharge With Cutting Edge Electrode
24.	Application Research On On-line Detection Technology Of Deep Hole Axis Deviation
25.	Process Parameter Optimization And Quality Control Of Deep Hole Gun Drilling
26.	Design Of Gundrill Chip Breaker Groove And Its Application In Deep-hole Drilling Of 42CrMo And RuT450
27.	Research And Development Of Rapid Design System For NC Deep Hole Machining Machine Based On Knowledge Reuse
28.	Research And Development Of Virtual Deep Hole Machining System Based On Unity3D
29.	Study On Deep-Hole Machining Surface Integrity Of Nuclear Power Steam Generator Tube Sheet Materials And Drill Wear
30.	Experimental Study On Deep Hole Technology Of 25Cr2Ni4MoV Alloy Steel
31.	Research On Oxygen-free Copper Deep Hole Processing Technology
32.	Research On Intelligent Monitoring Technology Of Deep Hole Boring Tool Condition
33.	Development of chip size monitoring system in deep-hole machining
34.	AN ANALYTICAL AND EXPERIMENTAL STOCHASTIC MODELLING OF THE RESULTANT FORCE SYSTEM IN BTA DEEP-HOLE MACHINING AND ITS INFLUENCE ON THE DYNAMICS OF THE MACHINE TOOL WORKPIECE SYSTEM
35.	Research On Deep Hole Machining Technology Of Multi-point Flexible Support Tube Electrode EDM
36.	Research On Drilling Technology Of GH4169 With Machine-clamped Deep Hole Drill
37.	Analysis And Experiment Of Tool Electrodes And Parameters Of Arc Plasma In Deep Hole Machining
38.	Research On Design Of Intermittent Deep Hole Machining Process
39.	Research On Mixed Plasma For Deep Hole Machining Of GH4169 Superalloy
40.	Research And Development Of Cryogenic Minimum Quantity Lubrication Deep Hole Machining System
<<First <Prev Next> Last>> Jump to