Font Size:
a
A
A
Keyword [die surface]
Result: 1 - 20 | Page: 1 of 2
1.
Micro-mechanism And Control Of Elastic-plastic Contact And Wear For Extrusion Forming Process
2.
Analysis And Control Of Drawing Springback Of Box Part Based On FEM
3.
Research On The Knowledge Based Panel Die Surface Design
4.
Optimal Design Of Drawing Die Surface For Automobile Panel
5.
Analysis And Control Of Springback Of Autobody Penal
6.
Motion Simulation Of Die Polishing Structure And Study On The Polishing Technological Parameter
7.
Study On H13 Steel For Magnesium Alloy Die-casting Die Surface Strengthened By RE-B-N-C Multi-elements Penetrating
8.
Analysis And Control Of Springback For The Pillar Of Bumper Based On FEM
9.
Research On Die Surface Designing Method Compensating Springback In Sheet Metal Forming
10.
Study On Springback Of High-Strength Steel Stamping
11.
Process Analysis And Experimental Research On Stretch Bending Forming Of Tailor-welded-blank Structural Part
12.
Research On Quasi-static Contact Stress Peak Of Die Surface In High Strength Steel Stamping
13.
Analyse On Rebound Control For Over Pieces Of Tractors
14.
Study Of Fine Blanking Die Life Under The Influence Of Tool Steel And Surface Coatings
15.
The Numerical Simulation And Experimental Research On Bending Springback And Die Surface Compensation
16.
Numerical Research On Sheet Metal Stretch Forming Based On Varying Forming Surface Of Multi-point Die
17.
Research On Die Surface Quality Improvement And Spring-back Control For The Automobile Fender
18.
Study On The Drawing Process And Springback Control Of The Dual Phase High Strength Steel For Automobile
19.
Research On Forming Process Of Automobile Front Bracket
20.
Research On Ni/TiC Coating On Aluminum Alloy Die Casting Die Surface By SHS
<<First
<Prev
Next>
Last>>
Jump to
