dry machining - Globe Thesis

Keyword [dry machining] Result: 1 - 16 \| Page: 1 of 1
1.	Study On Micro-pool Self-lubricating Cutting Tools
2.	Deposition Techniques And Dry Machining Properties Of CVD Diamond Coated Cutting Tool On WC-Co Cemented Carbide
3.	Design Of Vortex Tube For Cutting And Experiment & Simulation Of Air Cooled Cutting
4.	Research On Finite Element Simulation Technology Of Dry Machining
5.	Study On The Fabrication Of Diamond-like Carbon Film And Its Performance Of Cutting Aluminum Alloy
6.	Research On The Near Dry And The Action Mechanism Of Lubircation In Deep-hole Drilling System
7.	Study On Micro-texture Self-lubricating And Pulsating Heat Pipe Self-cooling Dry Cutting Tools
8.	Fabrication And Cutting Performance Of Soft Coated Micro-nano Textured Self-lubricating Tools
9.	Experiment Investigation On Surface Residual Stress In Dry Machining And It's
10.	Research On Technology And Mechanism Of High-speed Dry Electrical Discharge Milling Of High-strength And High-hardness Materials
11.	Near-dry machining of 319 aluminum-silicon alloy
12.	A macro level environmental performance comparison: Dry machining process vs wet machining process
13.	Influence of cutting-edge preparation on the performance of PVD-coated inserts in dry machining
14.	Predictive modeling of near dry machining: Mechanical performance and environmental impact
15.	Predictive modeling and simulation of two-dimensional cyclic chip formation process in dry machining using slip-line models
16.	An assessment of tool-life performance in NDM (near dry machining) of automotive steel components for sustainable manufacturing
<<First <Prev Next> Last>> Jump to