electrical discharge machining(EDM) - Globe Thesis

Keyword [electrical discharge machining(EDM)] Result: 21 - 40 \| Page: 2 of 2
21.	Dc Linear Motor Dsp For Edm Machine Control Technology
22.	Edm Fluid Performance Improvements
23.	Study On Debris And Bubble Movements And Control Strategy For Realizing High Efficiency Machining Of Electrical Discharge Machining
24.	Basic Research On Electrical Discharge Machining Ablation
25.	Simulation And Experiment Research On The Mechanism Of Piezoelectric Self-adaptive Pulsed Electrical Discharge Machining
26.	Study On The Process And Mechanism Of Powder Mixed Near Dry Electrical Discharge Machining
27.	Research On The Electrical Discharge Machining(EDM) Process Of Large Aspect Ratio Hole In Tungsten
28.	Study On Processing Characteristics Of EDM Using Muliti- Electrode Muliti-circuit Method
29.	Research On The Material Microstructure Scale Effects In Micro Electrical Discharge Machining
30.	Research On Efficiency Improving Technology In Edm Process Of Integral Shrouded Blisk
31.	Research On The Technology And Mechanism Of Vibration Assisted Electro-arc Milling
32.	Research On The Technology And Mechanism Of High Voltage Excitation Electro-arc Machining
33.	Study On Thermal Fluid Simulation And Experiment Of Arc Plasma In Electrical Discharge Machining
34.	Research On Flow Field And Discharge State Of EDM Small Hole Machining For Thermal Barrier Coated Superalloy
35.	Study On The Preparation And Properties Of Electrical Discharge Machining (EDM) And Electrochemical Machining (ECM) Working Fluid
36.	Study On EDM-machining Performance Of Sheet Electrode In Water-based Dielectrics
37.	Design Of Servo Control System For Spindle Rotating Ultrasonic Vibration Assisted EDM Platform
38.	Plasma process applications: Analysis of wire electrical discharge machining (EDM) process and conversion of methane to acetylene using plasma reactor
39.	Research On The Influence Of Helical Electrode On Deep Micro-Hole Machining By EDM
40.	Simulation Analysis Of Deteriorated Layer And Residual Stresses On Surface Of Edm Workpiece
<<First <Prev Next> Last>> Jump to