flanging - Globe Thesis

Keyword [flanging] Result: 61 - 79 \| Page: 4 of 4
61.	Mechanics of bending, flanging, and deep drawing and a computer-aided modeling system for predictions of strain, fracture, wrinkling and springback in sheet metal forming
62.	Study On Flanging Process And Designing Prefabricated Hole Of AA5052 Alloy Tube By Electromagnetic Forming
63.	Research On Process And Numerical Simulation Of Shaped Hole Electromagnetic Flanging On AA5182 Aluminum Alloy
64.	Design And Research Of Flanging Equipment And Operational Frame Of 50-type Spiral Steel Silo
65.	Research Of Electromagnetic Sheet Metal Flanging Based On Axial And Radial Electromagnetic Force Loading
66.	Research On The Forming Law Of 1060 Aluminum Incremental Forming Outer Flange Flanging
67.	Research On Process And Application Of Electromagnetic Punching On AA5182 Aluminum Alloy For Vehicle Body
68.	Study On Forming Technology Of Progressive Turning Holes Of Curved Profiles Without Dies
69.	The Study On AA5182 Metal Sheet Electromagnetic Driven Punch Flanging Process And Numerical Simulation
70.	Research On Performance Of Elongation Flanging Process Based On Single-point Incremental Forming
71.	Research On Time Sequence Flanging Forming Of Concave Flanging Model Based On Numerical Simulation
72.	Research On Electromagnetic Tube Flanging With Radial-axial Electromagnetic Force Loading
73.	Research On Electromagnetic Actuator Design,Force Field Control And Forming Process Of Sheet And Tube Metal Flanging
74.	Study On Warm Forming And Springback Of Drawing-Flanging Of High Strength Steel Sheet With Center-Hole
75.	Simulation Analysis Of Double Flanging Flaring Forming For 5A02 Small Diameter Aluminum Alloy Tube
76.	Study On Magnetic Pulse Flanging Process Of AA6063 Aluminum Alloy Curved Plate And Inductor Failure
77.	Research On Electromagnetic Blanking-flanging Compound Forming Of Aluminum Alloy Y-shaped Tube
78.	Optimization And Experiment Of Spinning Forming Process Of Rocket 2219 Aluminum Alloy Fuel Tank Head
79.	Research On Accurate Spin-forming Of A U-shaped Cross Section Frame Ring For Launch Vehicle Application
<<First <Prev Next> Last>> Jump to