frictional wear - Globe Thesis

Keyword [frictional wear] Result: 1 - 20 \| Page: 1 of 5
1.	Synthesis And Characterization Of Diamond-like Carbon Films By Rf. PECVD
2.	Microtructure Evolution Of Al-In And Cu-Pb Monotectic Alloys Directionally Solidified In High Temperature Gradient
3.	Structure And Property Of Cr-based Coatings On Mg Alloy By Magnetron Sputtering
4.	Microstructure And Interfacial Characteristics Of Wear-resistant Composite Coatings On Copper By Laser Cladding
5.	Fundamental Research On Machinability Of Titanium Alloy By Thermohydrogen Treatment
6.	Microstructure And Properties Of FeCrAl Coating And NiCr Coating By Hvas
7.	Research Of Wear Properties For In Situ Ferrous Metal Matrix Composite Materials
8.	Study On Mechanical Properties Of Alloy ZL108 Made From Electrolytic Low Titanium Aluminum Alloy
9.	The Properties Of Diamond-like Carbon Films On Stainless Steel By Rf PECVD
10.	Research Of Friction And Wear Between Drill Pipe And Casing
11.	Study On The Modification Of Phenolic Resin Applied To Friction Materials
12.	Study On The Low Temperature Nitriding And Character Of Frictional Wear Of Hydropost
13.	The Study Of Preparation Technology And Frictional Wear Property Of Copper Matrix Composites Pantograph Slider
14.	Investigation On Microstructure, Elevated-temperature Tensile Properties And Behavior Of Frictional Wear Of Magnesium Alloy Tube
15.	Microstructure And Properties Of Ceramic Particles/carbon Fibre Hybrid Reinforced/Cu-graphite Composites
16.	Study On Friction And Wear Of Compacted Graphite Iron With Biomimetic Coupling By Cast-in Process
17.	Research On Influence Of Adding Cu To WC-Co Coatings By Plasma Spraying
18.	Study On A New Type Of Maceration Alloys With Low-Cost And High-Property Used In PDC Bits
19.	Study On Reparation And Performance Of Laser-Modified Tic/β-Ti Composite Coatings
20.	Influence Of Units With Nano-grains Fabricated By Pulsed Laser Melting Under Water Film On Frictional Wear Performances Of Metal
<<First <Prev Next> Last>> Jump to