geometric parameter - Globe Thesis

Keyword [geometric parameter] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Parameter Optimistic Method And Experiment Of Cutting Tool For Processing Woodblock In Paving Woodiness Ground
2.	The Structure Analysis And The Computer Simulation Of The Spider Pipe Die
3.	Study On Practical Measurement Technology Of Geometric Parameters In Enterprise
4.	Trajectory Planning Of Geometric Parameter Precision Measuring For Thin-wall Revolving Body
5.	Structural Strength Analysis Of Con-rod Splitting Clamp And Geometric Parameters Influence
6.	Effects Of The Operating Condition And The Geometric Parameter On The Mass Transfer Rate In The Wavy-walled Tubes For Pulsatile Flow
7.	Study On The Dispersive Mixing Performance Of The Reciprocating Single Screw PIN-Barrel Extruder
8.	Digital Image Processing Technology Applied Research, The Precision Measurement Of The Geometric Quantities
9.	The Study For Two-dimensional Geometric Size Measurement Algorithm Of Parts Based On Image Processing
10.	Analysis For Bearing Capacity Of Y And K Joint Of Composite Materials Truss
11.	Ball Screw Threaded Surface Parameters Non-contact Measurement System Design And Analysis
12.	Error Analysis And Accuracy Compensation Of DJCLY92B Image Processing Based Cutting-tool Measuring Instrument
13.	Calibration For Non-Contact Cutting-tool Geometry Parameter Measuring Instrument
14.	The Research On Stability And Geometric Parameter Optimization Of Gongchangling High-profile Dump
15.	Kinematic Calibration Of 3RPS Parallel Mechanism Based On Five-axis Hybrid Machine Tool
16.	The Geometric Parameter Measurement And Peripheral Edge Detection Of Indexable Inserts Based On MV
17.	Design Of System Structure And Calibration Scheme Of The Comprehensive Measuring Instrument For The Geometric Parameter Of Ceramic Tile
18.	The Influence Research Of Temperature On Vibration Characteristics Of Exposed Pipeline In Goaf
19.	Influence Of Multilayer Coupled Seepage Field On High-Efficiency Mining Of Coal-Fired "Three Gas"
20.	Research On Wear And Tool Geometric Parameter Optimization Of Cemented Carbide Plunge Milling Tools
<<First <Prev Next> Last>> Jump to