hard cutting - Globe Thesis

Keyword [hard cutting] Result: 21 - 40 \| Page: 2 of 3
21.	Research On Chip Formation Mechanism Of Hard Cutting High Strength Steel 42CrMo
22.	Finite Element Analysis Of High-Speed Cutting Hardened Steel And Research On Tool Parameters
23.	The Study On Mechanism Of High-speed Cutting Of High-strength Hardened Steel With Continous CBN Tools
24.	Structural Design And Dynamic Performance Study Of A Hard Turning Machine Tool Using Hydrostatic Bearing Technology
25.	The Research On Polycrystalline Cubic Boron Nitride Tools Hard Cutting The Powder Metallurgy Valve Seats
26.	Tool Wear And Surface Quenching Mechanism For Hard Cutting Process Of Die Steel
27.	Research On Frictional Behaviour By Finite Element Simulation Of Dry Turning Hardened Steel
28.	Research On Hard Cutting Performances Of Chamfered PCBN Tool
29.	Finite Element Simulation And Cutting Experiment Of TiAlN / B _{C / CBN Multilayer Coated Blade High Speed Hard Cutting}
30.	Study On Near Surface Properties Of GCr15 Bearing Ring Under Hard Cutting Process
31.	Research On Microstructure Formation Mechanism Of White Layer In High Speed Dry-hard Cutting
32.	Research On Finite Element-Cellular Automaton Coupling Simulation For Dynamic Recrystallization Of Surface Change Layer In High Speed Dry-hard Cutting
33.	Research On Formation Mechanism Of Chip And Surface Integrity In Hard Cutting Hardened Steel
34.	Research On Characteristic And Performance Of Cutting Surface In Machining Hardened Steel
35.	Database And Performance Evaluation Of PCBN Tool In Hard Cutting
36.	Study On The Fracture Mode Of The Material In The Main Shear Zone Of Dry Hard Cutting
37.	First-Principles Investigation On Thermal Stability And Oxidation Resistance Of Cr-Al-N Hard Coating Of Cutting Tool
38.	Study On Design Of PCBN Tool With Enhanced Edge And Its Hard Cutting Performance
39.	Study On Microstructure And Wear Resistance Of The Metamorphic Layer Of GCr15 Bearing Steel In Hard Cutting
40.	Investigation On Microstructure Evolution And Mechanical Property Evaluation In Hard Cutting Of H13 Steel
<<First <Prev Next> Last>> Jump to