hardening rate - Globe Thesis

Keyword [hardening rate] Result: 1 - 19 \| Page: 1 of 1
1.	Research On Microstructure Evolution And Dynamic Recrystallization Behavior Of Titanium Alloy TB6 And TA15 During Î² Forging
2.	The Mechanics Behavior And Dynamic Recrystallization In Hot Deformation Of AZ31 Alloy
3.	The Study On Flow Stress Model Based Dislocation Density
4.	Study On Martensite Microstructure And Properties Of Austenitic Steel After Cold-rolling And Annealing
5.	Effect Of Heat Treatment On The Microstructure And Mechanical Properties Of Extruded Mg-Zn-Y Alloy
6.	Research On The Mechanical Properties And The Microstructure Of Extruded Mg-12Gd-3Y-0.5Zr(wt.%) Alloy
7.	Research Duplex Steel Flow Stress Model And Hardening Characteristics Based On Micromechanics
8.	Optimization Of The Plasticity And The Flow Stress Stability Of The Nanostructure Al-1%si Alloy
9.	Research On High Temperature Mechanic Behavior And Microstructure Performance Calculation Of GH4742 Superalloy
10.	Irradiation Hardening Of V-4Cr-4Ti And V-5Cr-5Ti Alloys Due To Helium Implantation And Atomic Displacement Damage
11.	The Mechanical Behavior Of Heterogeneous Cu And Cu-Zn Alloy
12.	A Study On Processing-Microstructure-Property Of Fine-Grained High Strength Dual Phase Steel With High Coatability
13.	Uniaxial Tension Andserrated Plastic Flow Behavior Of High Manganese Austenitic TWIP Steel
14.	Research On Dynamic Recrystallization Kinetics Of Rare Earth Magnesium Alloys
15.	Reduction of work hardening rate in low-carbon steels
16.	Study On Austenite Reversed Transformation Behavior And Microstructure And Properties Of Medium Manganese Steel
17.	Influence Of Mn On High Temperature Tensile Behavior Of 18%Cr-node Nickel Duplex Stainless Steel
18.	Mechanical Properties And Microstructure Of The CoCrFeNi Medium Entropy Alloy And Its Shear Band
19.	Research On The Influence Of Q&P Process On The Mechanical Properties And Microstructure Evolution Of Medium Manganese Steel
<<First <Prev Next> Last>> Jump to