high speed machining - Globe Thesis

Keyword [high speed machining] Result: 161 - 180 \| Page: 9 of 10
161.	Investigation Of Mechanism In High Speed Machining Of 40CrNi2Si2MoVA Ultra High Strength Steel
162.	Influence Mechanism Of Material Deformation And Fracture Behavior On Chip Formation During High Speed Machining
163.	Investigation Into Ultra-Precision Machining Induced Subsurface Damage In Nanocrystalline Materials
164.	Research On Microstructure Formation Mechanism Of White Layer In High Speed Dry-hard Cutting
165.	Analysis Of The Imbalance Vibration Behavior Of High Speed Spindle And Research Of Its Suppression Method
166.	Tool Path Planning Research Of Cnc High Speed Machining Based On Triangular Mesh Surface
167.	Experimental Study On On-Line Temperature Measurement Of High Speed Machining Process Of Difficult Machining Material
168.	Study On The Influence Mechanism Of Vibration On The Damage Of High SPeed Cutting Tools
169.	The Research Of Mechanism Of Workpiece Material Surface Layer Formation During High Speed Machining
170.	Diffusion Wear Characteristic Of Cutting Toolin High-Speed Machining Ti6Al4V
171.	Finite Element Simulation Of High Speed Machining Ti6Al4V And Optimization Of Cutting Parameters
172.	Finite Element Analysis And Friction Model Of Ti6A14V High Speed Machining
173.	Cr12MoV Chip Formation In High Speed Machining Finite Element Simulation Of Process
174.	Research And Implementation Of Adaptive Prospective Interpolation Method For High Speed Machining Based On The Cubic Polynomial Model
175.	Study On High Speed Machining Characteristics Of Aluminum Matrix Composites
176.	Research Of High-speed Tool Holder On The Centrifugal Expansion Dynamicly Compensating By Mesh Cone
177.	Experiment Research On High Speed Machining Compacted Graphite Cast Iron With Hard Brittle Tools
178.	Study On Fabrication And Properties Of Ceramic Cutting Tools For High Speed Machining Nickel-based Superalloys
179.	Preparation, Microstructure And Properties Of Ultrafine Grain Gradient Cemented Carbide For High Speed Machining Of Titanium Alloy
180.	Research On Technology And Mechanism Of High-speed Dry Electrical Discharge Milling Of High-strength And High-hardness Materials
<<First <Prev Next> Last>> Jump to