hole surface - Globe Thesis

Keyword [hole surface] Result: 1 - 17 \| Page: 1 of 1
1.	Study On The Drilling Technology Of CFRP
2.	Theoretical Analysis And Experimental Study On Hole Surface Finishing New Technology Based On Magnetic Field Characteristics
3.	The Basic Theory Research Of The Liquid-particle Two-phase Spiral Flow Finishing Technique
4.	Study On The Application Of "Hole By Hole" Control Blasting Technology
5.	Device Design And Experimental Study Of Loquid-Particle Two-Phase Compulsive Circumfluence Oriented Hole Surface Finishing
6.	The Study On Hole Surface Finishing Process Based On The Composite Of Magnetic Field And Swirling Air
7.	The Numerical Simulation And Experimental Study Of Gas-Particle Two-Phase Compulsive Circumfluence Oriented Hole Surface Finishing
8.	The Technical Scheme And Analysis Of Dynamic Eddy Current Barrel Finishing For Hole
9.	Study On Fabrication,Tribological Properties Of Highperformance Diamond Films And Application On Hole Surface
10.	Experimental Study On Electrochemical Grinding Of K424Cast Nickel-base Superalloy
11.	The Study Of Strength Mechanism Of The Large Scale Hole Surface By Mandrel Expansion Process
12.	Precise Finishing Process And Experimental Research On Typical Hole
13.	Study On Some Anti-plane Problems Of Nano Defects
14.	Experimental Research On The Precision Finishing Of Inner Surface Of Blind Hole
15.	Study On Small Diameter Deep Hole Of Hard And Brittle Materials By Ultrasonic Vibration Of Rack Cold Roll-beating
16.	Study Of Abrasive Flow Machining Simulations And Experiments On Inner Hole
17.	Investigation On Inner Surface Quality And Hole Edge Defects In Ultrasonic Vibration Drilling Of Aluminum Silicon Carbide With High Volume Fraction
<<First <Prev Next> Last>> Jump to