hot extrusion forming - Globe Thesis

Keyword [hot extrusion forming] Result: 1 - 16 \| Page: 1 of 1
1.	Study On The Hot Extrusion Forming And FEM Simulation For Multi-layer Thin Walls Columnar Parts
2.	The Effect Of Solid-solution On The Micro-structure And Performance Of Aluminum Alloy With Iron
3.	Process Design And Numerical Simulation Of Hot Extrusion Forming For Deep Hole Parts
4.	The Research Of Variable Diameter Pipe Hot Extrusion Forming Technology
5.	Volume Distribution Non-uniform Aluminum Alloy Frame Extrusion Forming Process Simulation
6.	Study On The Process And Equipment Of J55 Spiral Tube Forming With Uniform Wall Thickness
7.	Study On The Hot Deformation Behavior And Hot Extrusion Forming Technology Of AZ80 And ZK60 Alloy
8.	Microstructures And Mechanical Properties Of In Situ Synthesized Nano/micron-sized TiC Reinforced Al/Al-Cu Matrix Composites
9.	The Microstructure Analysis And Numerical Simulation For Hot Extrusion Forming Based On Thick-wall Pipe Of As-cast P91 Steel
10.	The Study On Hot Extrusion Forming Process Parameter And Workpiece Properties Of Tin Bronze
11.	Study On Hot Extrusion Forming Process Of Magnesium Alloy Conical Shell
12.	Fabrication Processing,Mechanical And Electrical Properties Of Cu-coated TiCp/Al Composites
13.	Study On The Deformation Behavior And Hot Extrusion Forming Technology Of As-Extruded Mg-Gd-Y-Zn-Mn Alloy
14.	Numerical Simulation And Process Research On Hot Extrusion Forming Of 5A06 Aluminum Alloy Center Frame
15.	Study On The New Technology Of Vacuum Filling-Extrusion For Al-Mg Alloy Composite Rod
16.	Basic Research On Hot Extrusion Forming Of The Low Cost And Ultra-High Strength Mg-Ca Based Alloy
<<First <Prev Next> Last>> Jump to