inert gas - Globe Thesis

Keyword [inert gas] Result: 1 - 20 \| Page: 1 of 7
1.	Research On Low-Power Laser-Tungsten Inert Gas (TIG) Hybrid Welding Technology Of Mg Alloy
2.	Study On Applied Properties Of Al-Mg-Mn And Al-Mg-Mn-Sc-Zr Alloy Sheets And Its Related Fundamental Research
3.	Investigation Of Microstructure And Stress Distribution Of The Super-Ni/NiCr Joint Zone By TIG Welding
4.	Effect Of Inert Gas Injection On Transport Law Of Gas In Closed Fire Zone
5.	Research On Ultrasonic-arc Behaviors And Ultrasonic Assisted Tig Welding Method
6.	Research On Low-power YAG Laser + Tungsten Inert Gas (TIG) Hybrid Welding Technology
7.	Studies On The Effects And Mechanisms Of High Pressure Inert Gas Treatments On The Shelf-life Of Fresh-cut Pineapple And Apple During Cold Storage
8.	Study Of Structure And Mechanical Properties Of 10Ni5CrMoV Steel MIG Welding Joint
9.	Study On Electron Beam Welding And Tungsten-arc Inert-Gas Welding Techniques Of Shell Made Of Super-Strength Steel
10.	The Research On The Preparation Regularities Of Ultra-fine Metal Powders Utilizing Inert Gas Evaporation And Condensation Technique At Reduced Pressures
11.	Study On Vegetable Preservation By Pretreatment With Pressurized Inert Gases
12.	The Study Of Compositive Extinguishing Technique For Coal Spontaneous Combustion In The Fully Mechanized LTCC No.7321 Overly Long Faces
13.	Investigation On Activating Flux In Tungsten Inert Gas Welding Of T91 Steel
14.	The Experimental Research And The Computer Simulation Of Remelt Hardening Of Camshaft With Tungsten Inert Gas Arc
15.	The Research On Premixed Flame's Quenching Of Inert Gas In Duct
16.	Safety Assessment On The Control System Of Inert Gas Plant During FPSO COW Based On Fuzzy-FMEA
17.	Effect Of Fire On Microstructures And Properties Of Copper And Its Welded Joint
18.	Corrosion Behavior And Protection Of Several Different Welded Joints Of Magnesium Alloy
19.	Mathematical Model Of Bubble Formation And Dissolution Process In Polymer
20.	Research On The Microstructures And Mechanical Properties Of Joints Of Tungsten Inert Gas Arc, Laser Beam And Friction Stir Spot Welding Of Magnesium Alloys
<<First <Prev Next> Last>> Jump to