injection - Globe Thesis

Keyword [injection] Result: 1 - 20 \| Page: 1 of 10
1.	Study And Application Of The Flow Injection Biamperometry For Irreversible Redox Couple System
2.	Research On Prediction Of Shrinkage For Injection Molded Parts
3.	Numerical Simulation, Optimization And Control Of Filling Process In Injection Molding
4.	Study Of Injection Behavior Of Polymer Melt And Properties And Morphology Of Specimen Under Vibration Injection Molding
5.	Study On The Synthesis And Application Of Novel Biomaterials
6.	Investigation On The New Chemiluminescence Analytical Systems And New Chemiluminescence Analytical Methods
7.	The Investigation And Analytical Application Of Electrogenerated Chemiluminescence Analysis With Flow-injection Technique And Chemically Modified Electrode Technique
8.	Model And Simulation Of Viscoelastic Polymer Melts Injection Molding
9.	Simulation-Based Studies On Processing Optimization And Part Performance In Injection Molding
10.	Fluid-Solid Coupling Theory Of Exploiting Coal Methane And Improving Coal Methane Production By Gas Injection In Low Permeability Reservoir And Its Application
11.	An Investigation On The Tissue Enzyme Catalysis-Based Optical Analytical Systems And The Analytical Applications Of Novel Chemiluminescence Systems
12.	Study On Capillary Electrophoresis With Amperometric Detection And Its Applications
13.	Study On Prediction Of Rockburst With Water Injection Into Coal Seam In Fuxin Mine District
14.	Development Of Gas Carrying Evaporation And Study Of The Fouling On Its Heated Surface
15.	Study On The Flow Injection Analytical Methods Based On Pre-reaction On Line
16.	Feature-Based Modeling, Graded Meshing And Mid-Plane Extraction For Plastics Injection Mold CAE
17.	Process Optimization And Part Quality Control For Plastic Injection Molding Based On Numerical Simulation
18.	3D Flow Simulation For Viscous Incompressible And Non-isothermal Melt In Injection Molding
19.	Study And Application Of Design Optimization For Injection Molding
20.	Shape Retention During Molding And Debinding Of Injection Molded 17-4 PH Stainless Steel Compacts
<<First <Prev Next> Last>> Jump to