Font Size: a A A
Keyword [injection parameter]
Result: 1 - 20 | Page: 1 of 3
1. The Study On Polymer Flooding Mechanism Of The Middle Reservoirs In Different Geologic Model
2. The Study On Pilot Test Of Steam Stimulation Of Block Viscous Oil Reservoir With Thin Interlay
3. Research On Key Technologies Of CAE System For Injection Molding
4. Research On Reasonable Injection Parameter Of Polymer Driving Of PuⅠ1-3 Production Interval In Western Xing 4 Area
5. The Research On Adaptiveness And Effect Evaluation Of Cyclic Steam Stimulation Method In Dong Xin Oilfield
6. Experiment Study On Polymer-surfactant System Flooding Technology In An 12 Block Of Shen 84 Oilfield
7. Study On The Optimization Of High-concentration Polymer Flooding Of The First-order Oil Reservoir At The Late Stage Of Polymer Flooding In Sabei Development Block
8. Experiment Study On Polymer Flooding Technology In Xi5-16 Block Of Fuyu Oilfield
9. Parameters Optimization Design Research Of Gas Injection For Oil For Carbonate Rocks Seam Hole Type Oil Reservoir
10. Research On Difficult-to-produce Reserves In C622
11. Development Program Of Ken Dong70-X102Well Area
12. Heavy Oil Thermal Recovery Steam Injection Ground Pipeline And Wellbore Hydraulic Thermodynamic Coupling Model
13. Study On The Optimum Selecting Of Polymer Injection Parameter In Different Stages And Well Pattern Optimization In Well Block Ta2
14. CFD-Based Parameters Optimization Of Hydraulic Jet Of Drill
15. Research On Weakening Technology Of Top-coal Caving Mining Of Tun Bao Mine
16. Injection Parameter Optimization Of Car Headlights On CAE Technology
17. The Study On Different Polymer Flooding Wells Injection Parameter Optimization In The Southern Seven District
18. The Study Of Steam Drive After Steam Soaking In A-Oil Reservoir
19. Research On Optimization Reasonable Injection Parameter Of The Polymer Flooding In Xing 1～2 Area
20. Research On The Residual Oil Analysis And Water Injection Parameters Adjustment In Xinzhan North Block
  <<First  <Prev  Next>  Last>>  Jump to