Font Size:
a
A
A
Keyword [insert]
Result: 21 - 40 | Page: 2 of 9
21.
Synthesis Of Several 2:1 Type Of Mg
2
Al Hydrotalcite And The Pillared Change Of Layer Region
22.
Research On Sticking Failure Mechanism And Failure Criterion For Milling Insert With 3D Groove
23.
Research And Development Of Milling Insert With 3D Complex Groove
24.
The Theory Analysis Of Cut-in Type For Milling Insert With 3D Complex Groove And Its Exploiture Research
25.
Research Of Some Problems About Cutting Tools Design And Manufacture
26.
Research On The Technology Of Optimizing Groove For Milling Insert With 3-D Complex Groove
27.
Research On Temperature Field Under Irregular Hot Source Of Milling Insert Based On CA Algorithm
28.
Weft-insert Carriers Movment Research Of Multiaxial Warp Knitting Machine
29.
Research Of Groove Design And Fracture Mechanism Of Indexable Inserts
30.
Research Of Wear Mechanism And Chip-breaking Performance Of Indexable Inserts
31.
High-Alloy Casting Cold-Work Die Steel Insert
32.
Alloying Component Adjustment And Mechanical Properties Research Of TA15 Titanium Alloy EB Welding Joint
33.
Research And Application On High-speed Hard And Dry Cutting With PCBN Tool
34.
Preparation And Characterization Of An Exfoliated Graphite Inserting TiO
2
/V And Research For Its Function In Sorpting And Degradating
35.
Thermal-coupling Field Analysis And High-speed Cutting Performance Evaluation For The Curve-edge Turning Insert
36.
Study On The Theory And Application Of Cut-In Disrepair With 3D Complex Groove Wave-Edge Milling Insert
37.
Research On Stress Field And Coupled Physical Field Of Milling Insert Based On Cellular Automata
38.
Groove Design And Reconstruction Of Milling Insert With 3D Complex Groove
39.
Study On Mechanical-Thermal Coupled Physics Field For Milling Insert With 3D Complex Groove
40.
Study On Stress In Micro Electrodeposited Coating And Fabrication Of Micro Mould Insert
<<First
<Prev
Next>
Last>>
Jump to
